Specifications

TITLE
Cleaning the CSP Lamp Module Dust Filter
NUMBER
E538
REV
0
Page
2 of 3
DATE PREPARED
7/02/2002
CREATED BY:
K. Hultgren
EFFECTIVE DATE
7/02/2002
APPROVED BY:
B. Plunkett
DTS, 5171 Clareton Dr., Agoura Hills, CA 91301 Contact Document Control for the latest revision
2. After removing the lamp module, examine the condition of the dust filter screen. The screen
is in the front part of the lamp module. Dirt and dust accumulation on the screen must be
removed.
3. Use a cotton swab dipped in isopropyl alcohol to lightly wipe the screen. After you’ve wiped
the screen, use canned air to blow away remaining contaminants.