Specifications

XD10 Cinema Media Player, Installation and Operating Guide Version 1.0
1.8.4.4. Options
This menu gives you the option of specifying a black background for displayed subtitles, and lets you
adjust the light intensity of subtitle projection, if necessary for optimal viewing.
CSP Options
Douser Type
Background Color
Light Intensity
Use ▲ and ▼ to move the cursor,
use ► to open submenu.
The Douser Type submenu permits a choice between Electronic and Mechanical douser. The electronic
type opens and closes for each subtitle. The mechanical type opens at the beginning of the show and
closes at the end of the show.
Douser Type
( )Electronic
( )Mechanical
Use ▲ and ▼ to move the cursor,
then press ENTER to activate.
The Background Color menu allows a choice between black and normal.
Background Color
( )Normal
( )Black
Use ▲ and ▼ to move the
cursor, then press ENTER
to activate.
The Light Intensity menu allows a choice between low and high.
Light Intensity
( )Low
( )High
Use ▲ and ▼ to move the
cursor, then press ENTER
to activate.
The default setting is High. If the cooling fan stops running for some reason, the
projector will switch to Low power. High power will resume when the fan signal is on again.
Image Size: 50-100%
Vertical Offset: Test
Patterns:
Black
Flat Mask
Scope mask
View Area
White
Full Screen
Gray Patterns (1-4)
Options:
Douser Type
Background Color
Light Intensity
CSP SETUP
Caution: If the projector is run at high power without the fan running, it will get hotter than
normal and that could affect the projector life. Under normal circumstances it should not run
under low power because it degrades the lamp life.
Operational Overview Document #: 9301E692001.0
1-22