Specifications

XD10 Digital Playback System, Installation and Operating Guide Version 1.0
2.2. System Components
The following is a list of the standard components for an XD10 shipment. Refer to the actual packing slip
from your order to verify the contents of your shipment. Contact DTS immediately if items listed on your
packing slip are missing.
• DTS XD10 Player and power cord
• Timecode Reader Head, 35mm
• Reader Head Mounting Bracket
• Timecode Reader Head Interconnect Cable, 30 ft.*
• Analog Output Cable, 25-pin “D” M/F, 6 ft.**
• Digital Output Cable (option)
• Interface Items (cables, breakout boards) for the following processor types will be provided
(when designated at time of order). Refer to Table 2-1 on next page.
• Dolby CP45/CP65
• Dolby CP55
• Dolby CP200
• Dolby CP500
• Dolby CP650
• UltraStereo VX 12-ch Series
• UltraStereo JS Series
• Panastereo
• SMART MOD VI and VII
• Sony DFP-D3000
• DTS-6AD
• DTS-ECP
• Automation (logic) cable (varies per CP)
• Installation Hardware (screws, brackets)
• This installation and operations manual
• DTS trailer (logo) films, two scope and two flat
• DTS marquee panels (4 inches and 8 inches)
*Two projector (change-over) systems use a “Y” cable for Timecode and include an additional reader
head, mounting bracket, and hardware.
**Analog output cable (DTS Part #2503-0014-00) is used with cinema processors capable of discrete
multi-channel input: Dolby, Kintek, Pana-Stereo, RGM, Smart, and UltraStereo JS Series.
Installation Document #: 9301E692001.0
2-2