XM 2500 SPOT User Manual Rel 1.
XMARC 2500 SPOT 1200 Le informazioni contenute in questo documento sono state attentamente redatte e controllate. Tuttavia non è assunta alcuna responsabilità per eventuali inesattezze. Tutti i diritti sono riservati e questo documento non può essere copiato, fotocopiato, riprodotto per intero o in parte senza previo consenso scritto della DTS . DTS si riserva il diritto di apportare senza preavviso cambiamenti e modifiche estetiche , funzionali o di design a ciascun proprio prodotto.
XMARC 2500 SPOT 1200 INDEX: 1- TECHNICAL FEATURES 2- IMPORTANT SAFETY INFORMATION 4 5 2.1 Fire prevention 2.2 Prevention of electric shock 2.3 Protection against ultraviolet radiation 2.4 Safety 2.5 Level of protection against the penetration of solid and liquid matter 3- MOUNTING THE LAMPS 6 3.1 Lamp alignment 4- VOLTAGE AND FREQUENCY 5- INSTALLATION 7 7 5.1 Safety chain 5.2 Protection against liquids 5.3 Movement 5.4 Risk of fire 5.5 Forced ventilation 5.
XMARC 2500 SPOT 1200 1- TECHNICAL FEATURES The XM 2500 Spot is fitted with a Philips MSR 1200/SA discharge lamp (GY22 lampholder base), with a colour temperature of 5,600 °K and a luminous flux of 96,000 Lumens.
XMARC 2500 SPOT 1200 2- IMPORTANT SAFETY INFORMATION 2.1 Fire prevention: -XM2500 is fitted with a Philips 1200W MSR/SA lamp. -Other recommended lamps are: Osram HTI 1200W/SE PP; GE Lighting CSR1200W SA The use of any other alternative lamp is not recommended and will null and void the fixture's warranty. -Never locate the fixture on any flammable surface. -Minimum distance from flammable materials: 1 m. -Minimum distance from the closest illuminable surface: 1 m.
XMARC 2500 SPOT 1200 6 3- MOUNTING THE LAMPS: Warning: Switch off the unit before replacing the lamp. Philips MSR1200/SA Power 1200W Luminous flux 96,000 lm Colour temperature 5.600°K Lamp base GY 22 Rated life 800 hours Osram HTI 1200W/SE PP Power 1200W Luminous flux 105,000 lm Colour temperature 5.400°K Lamp base GY 22 Rated life 750 hours GE Lighting CSR1200W SA Power 1200W Luminous flux 100,000 lm Colour temperature 5.
XMARC 2500 SPOT 1200 4- Voltage and frequency The XM2500 E.B.(ELECTRONIC BALLAST) can operate at 190-245 VOLT 50 or 60 Hz. 5- Installation XM2500 may be either floor or ceiling mounted. For floor mounting installations, the XM2500 is supplied with four rubber mounting feet on the base. For ceiling mounted installations, we reccomend the use of appropriate clamps to fix the unit to the mounting surface.
XMARC 2500 SPOT 1200 8 Movement The projector has a maximum movement of 540° for Pan and 270° for Tilt. DO NOT place any obstructions in the path of the projector's movement. 270° 540° Risk of fire Each fixture produces heat and must be installed in a well-ventilated place. The minimum recommended distance from flammable material is 0.5m. Minimum distance from the object being illuminated is 2 m.
XM 2500 SPOT Ensure that the conductors do not touch each other. Do not connect the cable ground to the XLR chassy. The plug housing must be isolated. Connect the mixer signal to the DMX IN projector plug and connect it to the next projector by connecting the DMX OUT plug on the first projector to the DMX IN plug of the second one. This way all the projectors are cascade connected. NB.
XMARC 2500 SPOT 1200 DMX Addresses XM2500 can be used in two different modes: 30 or 18 DMX channels. If you want to use the XM2500 in 18 channels mode, select the 18 CH mode from the MODE menu and set the following addresses on the mixer: Projector 1 Projector 2 A001 A019 Projector 3 ….. projector 6 A037 A….
XMARC 2500 SPOT 1200 11 8- DISPLAY FUNCTIONS DISPLAY DMX OUT DMX IN MAINS 190-245V ~ 50-60 Hz MENU ENTER UP DOWN DISPLAY FUNCTIONS The XM2500 display panel shows all the available functions . Using these functions, it is possible to change some of the parameters and add some functions. Changing the D.T.S. setting can vary the functions of the unit so that it does not respond to the DMX 512 used to control it. Carefully follow the instructions below before carrying out any variations or selections.
XMARC 2500 SPOT 1200 12 8- DISPLAY FUNCTIONS MENU Up-Down ENTER TEST MODE Full test and single function test. GOBO1 ROT. Up-Down PAN GOBO1 SHAKE GOBO2 YELLOW DIMMER GOBO2 ROT. COLOR GOBO2 SHAKE GOBO1 ENTER Up-Down LAMP Lamp always ON-always OFF Or lamp ON-OFF selectable via DMX ON / OFF VIA DMX (default) ENTER ENTER ENTER SENS To set ON-OFF the electronic lamp sensor ZOOM EFFECTS ROT. ENTER ADJUST To adjust the lamp with no mixer connected.
XMARC 2500 SPOT 1200 13 8- DISPLAY FUNCTIONS MENU ENTER Up-Down Up-Down SOFTWARE VERSION Electronic cards software version. . . . MENU DISPLAY SOFTWARE (8 MOT PCB N°2) PAN-TILT SOFTWARE (PAN-TILT PCB) HEAD MOT. SOFTWARE (8 MOT PC N°1) ENTER Up-Down TEMPERATURE Head electronic thermic sensor AUTOMATIC FOCUS DISABLE MENU Up-Down . ENTER ENTER Up-Down AUTO FOCUS Automatic focusing AUTOMATIC FOCUS ENABLE ENTER GOBO ROTATION DISABLE MENU Up-Down .
9- ERROR MESSAGES ERROR: ENCODER PAN ERROR: ENCODER TILT ERROR: DMX ADDRESS ERROR: AUTO MODE INPUT ERROR: EEPROM DATA LOADER ERROR: RESET CIRCUIT LINE1 (CMY) ERROR: RESET CIRCUIT LINE2 (GOBO1 , COLOR) ERROR: RESET CIRCUIT LINE3 (GOBO2 , FOCUS , ZOOM) ERROR: RESET CIRCUIT LINE4 (EFFECTS , IRIS) ERROR: MAGENTA POSITION ERROR: CYAN POSITION ERROR: YELLOW POSITION ERROR: GOBO1 POSITION ERROR: GOBO1 INDEX POSITION ERROR: COLOUR WHEEL POSITION ERROR: GOBO2 POSITION ERROR: GOBO2 INDEX POSITION ERROR: ZOOM POS
XMARC 2500 SPOT 1200 15 10- HIDDEN MENU For technical personnel only. To operate this menu: -Connect the projector to the DMX controller (DMX SIGNAL MUST BE CORRECTLY RECEIVED) - Reset the XM2500 (reset from the MENU, not from the DMX controller!). - While reset is running, press the MENU and ENTER keys at the same time. Electronic calibration of the motors. Reset EEPROM (Reset all settings. ATTENTION: by pressing this key you must repeat all previous calibrations) Exit from hidden menu. ES.
XMARC 2500 SPOT 1200 16 ES. ENTER Up-Down ENTER Up-Down ENTER Up-Down ENTER Up-Down ENTER Up-Down ENTER Up-Down ENTER Up-Down ENTER Up-Down ENTER ZOOM ALIGNMENT To align zoom ES. Up-Down ENTER EFFECTS ALIGNMENT To align effects wheel ES. Up-Down ENTER EFFECTS INDEX ALIGNMENT To align effects wheel index ES. Up-Down ENTER IRIS ALIGNMENT To align iris ES. Up-Down ENTER CYAN ALIGNMENT To align cyan ES. Up-Down ENTER MAGENTA ALIGNMENT To align magenta ES.
XM 2500 SPOT 17 11- Opening up the projector housing It is possible to inspect the inside of the projector by removing the cover as indicated below. Attention REMOVE MAINS POWER PRIOR TO ACCESSING THE PROJECTOR’S INTERNAL COMPONENTS. 1) Loosen the screws which fix the side covers (photo 1 and 2) . 2) Once unscrewed, simply lift the covers to access the internal components (photo 3).
XMARC 2500 SPOT 1200 13 Periodic cleaning Lenses and reflectors Even a fine layer of dust can reduce the luminous output substantially. Regularly clean all lenses and the reflector using a soft cotton cloth, dampened with a specialist lens cleaning solution. Fans and air passages The fans and air passages must be cleaned approximately every 6 weeks. This periodic cleaning will depend, of course, on the conditions in which the projector is operating.
XMARC 2500 SPOT 1200 14- CONTROL MOTORS CAR Display 8 MOTORS PCB “1 Magnetic Sensors Line 1 Brown Line 2 Orange Electronic sensors lamp&temp Gobo1 (line 2) (BLACK) GND ORANGE BROWN VCC Gobo1 Rot.
XMARC 2500 SPOT 1200 14- CONTROL MOTORS CAR 8 MOTORS PCB “2” Magnetic Sensors Line 1 Brown Line 2 Orange Gobo2 (line 1) (BLACK) GND ORANGE BROWN VCC Gobo2 Rot. (Line 1) (DARK GREEN) J3 FROM Free J8 PAN & TILT Effects (line 2) (PINK) J5 FROM Iris (line 2) J10 PAN & TILT (GREY) + Zoom (line 1) (LIGHT BLUE) 30 VDC - Effects Rot.
XMARC 2500 SPOT 1200 21 15-DISPLAY CARD FROM J4 8 MOTORS CARD BLACK RED 16-PAN & TILT CARD BLACK BLACK PAN (WHITE) TILT GND (BROWN) (BLACK) 30 VDC (RED) FAN (B/W) ENCODER PAN (RED) ENCODER TILT (ORANGE) FROM J5 8 MOTORS (LIGHT GREEN) FROM J3 8 MOTORS (VIOLET) 17-LAMP ON-OFF CONTROL CARD DMX IMPUT (WHITE) 18-CABLES RESEND CARD LAMP ON-OFF DATA RED J4 DATA2 LIGHT GREEN TILT ENCODER ORANGE DATA1 VILOET FROM J9 8 MOT CONT.
XMARC 2500 SPOT 1200 22 19- DMX PROTOCOL 18 CHANNELS MODE 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 PAN msb 540° PAN lsb TILT msb 270° TILT lsb DIMMER SHUTTER COLOUR COLOUR MACROS GOBO 1 GOBO 1 ROTATION/INDEX GOBO 2 GOBO 2 ROTATION/INDEX IRIS EFFECTS EFFECTS ROTATION FOCUS ZOOM LAMP ON/OFF - RESET DMX CHANNEL 1 Parameter: PAN msb DMX CHANNEL 2 Parameter: PAN lsb DMX CHANNEL 3 Parameter: TILT msb DMX CHANNEL 4 Parameter: TILT lsb DMX CHANNEL 5 Parameter: DIMMER DMX range Value 0-7 8-25
XMARC 2500 SPOT 1200 23 DMX CHANNEL DMX range Value 6 Parameter: SHUTTER Mid point DMX value Move range (degrees) Mode Option 0-19 20-39 40-59 60-79 80-89 90-99 100-109 110 -119 120-129 130-139 140-149 150-159 160-169 170-179 180-189 190-199 200-209 210-219 220-227 228-233 234-255 DMX CHANNEL Function Black-out Open Black-out Random Strobe Strobe speed 1 min. Strobe speed 2 Strobe speed 3 Strobe speed 4 Strobe speed 5 Strobe speed 6 max. Pulse open speed 1 min.
XMARC 2500 SPOT 1200 24 DMX CHANNEL 7 Parameter: COLOUR DMX range Value Mid point DMX value 165-175 176-186 187-197 198-200 201-203 204-206 207-209 210-212 213-215 216-218 219-221 222-224 225-228 229-231 232-234 235-237 238-240 241-243 244-246 247-249 250-252 253-255 170 181 192 199 200 205 208 211 214 217 220 223 226 230 233 236 239 242 245 248 251 254 DMX CHANNEL 8 Move range (degrees) Mode Option Function Bicolour 8/9 Colour9 Bicolour 9/1 Right rotation speed 1 max.
XMARC 2500 SPOT 1200 25 DMX CHANNEL 9 Parameter: GOBO 1 DMX range Value Mid point DMX value 0-29 30-59 60-89 90-119 120-149 150-179 180-207 208-213 214-219 220-225 226-231 232-237 238-243 244-249 250-255 15 45 75 105 135 165 168 210 216 222 228 234 240 246 252 DMX CHANNEL 10 DMX range Value Move range (degrees) Mode Option Open Gobo 1 Gobo 2 Gobo 3 Gobo 4 Gobo 5 Gobo 6 Speed rotation 1 min.
XMARC 2500 SPOT 1200 26 DMX CHANNEL DMX range Value 12 Parameter: GOBO 2 ROTATION/INDEX Mid point DMX value Move range (degrees) Mode 0-127 128-185 186-197 198-255 DMX CHANNEL DMX range Value DMX range Value Function Index 0° - 360° Left rotation from fast to slow Stop Right rotation from slow to fast 13 Parameter: IRIS Mid point DMX value Move range (degrees) Mode Option Function Open Linear Iris from Open to Closed Closed Iris pulse at different speeds from Min to Max Iris closing at d
XMARC 2500 SPOT 1200 27 DMX CHANNEL DMX range Value 16 Parameter: FOCUS Mid point DMX value Move range (degrees) Mode Option 0-255 DMX CHANNEL DMX range Value Linear Focus 17 Parameter: ZOOM Mid point DMX value Move range (degrees) Mode Option 0-255 Function Linear Zoom DMX CHANNEL 18 DMX range Value Mid point DMX value 0-9 10-60 61-129 130-179 180-200 201-239 240-255 Function Parameter: RESET Move range (degrees) Mode Option Function No Effect Lamp OFF (activ.
XMARC 2500 SPOT 1200 28 30 CHANNELS MODE (DEFAULT) 1 2 3 4 5 6 7 8 9 10 11 12 13 12 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 PAN msb 540° PAN lsb TILT msb 270° TILT lsb SPEED MOVEMENT DIMMER SHUTTER COLOUR COLOUR MODE CYAN MAGENTA YELLOW COLOUR MACROS GOBO 1 GOBO 1 MODE GOBO 1 ROTATION/INDEX COARSE GOBO 1 INDEX FINE 16 bit GOBO 1 SHAKE GOBO 2 GOBO 2 MODE GOBO 2 ROTATION/INDEX COARSE GOBO 2 INDEX FINE 16 bit GOBO 2 SHAKE IRIS IRIS MACROS EFFECTS EFFECTS ROTATION FOCUS ZOOM LAMP ON/OFF - RESET DMX
XM 2500 SPOT 29 DMX CHANNEL 6 Parameter: DIMMER DMX range Value Mid point DMX value 0-8 9-255 4 DMX CHANNEL DMX range Value 7 Move range (degrees) Mode DMX range Value 0-27 28-55 56-83 84-111 112-139 140-167 168-195 196-223 224-255 Function Black-out Proportional dimmer Parameter: SHUTTER Mid point DMX value Move range (degrees) Mode 0-19 20-39 40-59 60-79 80-89 90-99 100-109 110 -119 120-129 130-139 140-149 150-159 160-169 170-179 180-189 190-199 200-209 210-219 220-227 228-233 234-255
XM 2500 SPOT 30 DMX CHANNEL DMX range Value 0-25 26-51 52-77 78-103 104-129 130-155 156-181 182-207 208-233 234-255 0-10 11-255 0-9 10-127 128-137 138-255 DMX CHANNEL DMX range Value 8 Parameter: COLOUR 1 Move range Mode Option Function (degrees) IF CHANNEL 9 = HALF COLOUR (Dmx range value 64 - 127) No Colour Bicolour ½ Bicolour 2/3 Bicolour 3/4 Bicolour 4/5 Bicolour 5/6 Bicolour 6/7 Bicolour 7/8 Bicolour 8/9 Bicolour 9/1 IF CHANNEL 9 = PROPORTIONAL COLOUR (Dmx range value 128 - 191) No Colour Propo
XM 2500 SPOT 31 DMX CHANNEL 12 DMX range Value Mid point DMX value Parameter: YELLOW Move range (degrees) Mode Option Proportional Colour 0-255 DMX CHANNEL 13 DMX range Value Mid point DMX value 0-9 10-44 45-79 80-114 115 -149 150-184 185-219 220-255 5 28 64 96 134 168 204 238 DMX CHANNEL 14 Parameter: COLOUR MACROS Mode Option Function Parameter: GOBO 1 Mid point DMX value 0-29 30-59 60-89 90-119 120-149 150-179 180-207 208-213 214-219 220-225 226-231 232-237 238-243 244-249 250-25
XM 2500 SPOT 32 DMX CHANNEL 16 DMX range Value Mid point DMX value Move range Mode Option Function (degrees) IF CHANNEL 15 = Gobo Rotation Mode (Dmx range value 0 - 127) Stop Right Rot. Prop. Speed Max to Min Stop Left Rot. Prop.
XM 2500 SPOT 33 DMX CHANNEL 19 Parameter: GOBO 2 DMX range Value Mid point DMX value 0-29 30-59 60-89 90-119 120-149 150-179 180-207 208-213 214-219 220-225 226-231 232-237 238-243 244-249 250-255 15 45 75 105 135 165 168 210 216 222 228 234 240 246 252 DMX CHANNEL 20 DMX range Value Move range (degrees) Mode Option Open Gobo 1 Gobo 2 Gobo 3 Gobo 4 Gobo 5 Gobo 6 Speed rotation 1 min.
XM 2500 SPOT 34 DMX CHANNEL DMX range Value 23 Parameter: GOBO 2 SHAKE Mid point DMX value Move range (degrees) Mode Option Stop Gobo Shake R-L Speed 1 Min.
XM 2500 SPOT 35 DMX CHANNEL DMX range Value 26 Parameter: EFFECTS Mid point DMX value Move range (degrees) Mode Option Function No effect Effect 1 Effect 2 Effect 3 Effect 4 Effect 5 0-41 42-83 84-125 126-167 168-209 219-255 DMX CHANNEL DMX range Value 27 Parameter: EFFECTS ROTATION/INDEX Mid point DMX value Move range (degrees) Mode Option Function Index 0°- 360° Left rotation from Min to Max Stop Right rotation from Min to Max 0-127 128-180 181-202 203-255 DMX CHANNEL DMX range Value
The information contained in this publication has been carefully prepared and checked. However, no responsibility will be taken for any errors. All rights are reserved and this document cannot be copied, photocopied or reproduced, in part or completely, without prior written consent from D.T.S. D.T.S. reserves the right to make any aesthetic, functional or design modifications to any of its products without prior notice. D.T.S.
