User manual

3- MOUNTING THE LAMPS:
Warning: Switch off the unit before replacing the lamp.
Philips MSR1200/SA
Power 1200W
Luminous flux 96,000 lm
Colour temperature 5.600°K
Lamp base GY 22
Rated life 800 hours
1) Using a screwdriver, remove the 4 screws (A,B, C,D) (photo 1) which fix the lamp holder.
2) Remove the lamp holder assembly (photo2).
Insert the lamp (photo 3).
The lamp used on XM 2500 is made in quartz glass and should be handled with care. Always follow the
instructions supplied in the lamp's packaging. Never touch the glass directly but use the tissue provided
in the lamp's packaging. The GY22 lamp socket is not symmetrical.
DO NOT USE UNDUE FORCE ON THE GLASS. In case of difficulty, read again the instructions and repeat
the procedure.
3) Replace the lamp assembly and tighten the screws (A,B,C,D) which were previously removed (photo
4).
3.1 Lamp alignment:
Attention: we recommend to align the lamp in the optical system to avoid overheating of the dichroic
filters and other components inside the unit.
Alignment is carried out using the 3 adjusters X, Y and Z.
During this operation you must have a uniform luminosity all around the projected area.
Osram HTI 1200W/SE PP
Power 1200W
Luminous flux 105,000 lm
Colour temperature 5.400°K
Lamp base GY 22
Rated life 750 hours
ARC 1200
6
Photo 2Photo 1 Photo 4Photo 3
GE Lighting CSR1200W SA
Power 1200W
Luminous flux 100,000 lm
Colour temperature 5.800°K
Lamp base GY 22
Rated life 750 hours
Photo 5
XM 2500 SPOT