User`s manual

9.3- Movement
Unlimited Pan rotation; unlimited Tilt rotation (XR300 BEAM FAR E.B. / XR300 BEAM FAR)
Pan 540° (3,9 sec.), Tilt 270° (2,6 sec.) (XR300 BEAM E.B. / XR300 BEAM BF)
9.4- Risk of fire
Each fixture produces heat and must be installed in a well-ventilated place. The minimum recommended
distance from flammable material is 1 MT.
Minimum distance from the object being illuminated is 2 MT.
9.5- Forced ventilation
You will note, on inspection, that the unit features various air inlets and cooling fans located on both the
base and head of the fixture. These should, under no circumstances, be blocked or obstructed whilst the
projector is in operation.
Doing so could cause the fixture to seriously overheat thereby compromising its proper operation.
9.6- Ambient temperature
The projector should never be installed in places that lack a constant air flow. The ambient temperature
should NOT exceed 40°C.
10- MAINS CONNECTION
XR300 BEAM with electronic ballast operate at 90-260 VOLT 50-60 Hz.
XR300 BEAM with Electromagnetic ballast operate at 230 VOLT
50 or 60 Hz.
Prior to connecting the unit to your mains supply,
ensure that the model in your possession correctly matches
the mains supply available. For connection purposes,
ensure that your plug is capable of supporting 5 amps at 230V,
Or 10 amps at 100-120 V
Strict adherence to regulatory norms is strongly recommended.
10.1- Protection
The use of a thermal magnetic circuit breaker is recommended for each XR300 BEAM.
A good earth connection is essential for the correct operation of the projector.
ARC 1200
11
2M
F
!
WARNING
Do not place any object in the path
of the projector’s movement
!
XR300 BEAM
Electronic ballast
90-260V 50 / 60Hz
540°
270°
Free Axis Rotation ("FAR")
No Free Axis Rotation ("FAR")
Electromagnetic ballast
230V 50 / 60Hz