User`s manual

ARC 1200
18
XR300 BEAM
DMX IN
DMX OUT
DISPLAY
MENU
ENTER
DOWN
UP
13- DISPLAY FUNCTIONS
DISPLAY FUNCTIONS
The XR300 BEAM display panel shows all the available functions . Using these functions, it is
possible to change some of the parameters and add some functions. Changing the DTS setting
can vary the functions of the unit so that it does not respond to the DMX 512 used to control it.
Carefully follow the instructions below before carrying out any variations or selections.
NOTE: the symbol shows which key has to be pushed to obtain the desired function.
DMX IN
DMX OUT
FUSE 5A T 5X20
XR300 BEAM BF (Cod. 03.MB003.L) • Electromagnetic ballast
Up-DownMENU ENTERUp-Down
PAN MOVEMENT INVERSION
To reverse Pan movement from left
to right and vice versa
Up-Down
Counterclockwise
Clockwise
Up-DownMENU ENTERUp-Down
TILT MOVEMENT INVERSION
To reverse Tilt movement from
bottom upwards and vice versa
Up-Down
Counterclockwise
Clockwise
ENTER
ENTER
ENTER
ENTER
MAINS
Electromagnetic ballast
230V 50 / 60Hz
MENU ENTER
Up-Down
Up-Down
SPEED control
Pan Tilt Speed control.
ENTER
ENTER
(DEFAULT : 4 )
Up-Down
MENU
ENTERUp-Down
REVERSE DISPLAY
To Reverse display's reading depending
on the mounting position
(On the ground or suspended).
Up-Down
Floor
position
Suspension
position
Up-DownENTER
Up-DownENTER
DISPLAY STAND BY
To turn off the display (after 5 seconds)
Or leave it always on.
Display OFF
Display
always ON
ENTER
ENTER
ENTER
ENTER