User`s manual

15- HIDDEN MENU
PAN ALIGNMENT
To align Pan position
TILT ALIGNMENT
To align Tilt position
GOBO WHEEL INDEX ALIGNMENT
To align Gobo wheel Index
ELECTRONIC
CALIBRATION OF THE
MOTORS
RESET EEPROM.
RESET ALL SETTINGS
TO 128 VALUE
EXIT FROM HIDDEN
MENU
CALIBRATION
PAN
MENU ENTER DOWN UP
MOTORS ALIGNMENT
134
DEFAULT CAL
MENU ENTER DOWN UP
SET ALL MOTORS AT 128
EXIT TO MAIN
MENU ENTER DOWN UP
Calibration mode
CALIBRATION
PAN
MENU ENTER DOWN UP
MOTORS ALIGNMENT
134
CALIBRATION
TILT
MENU ENTER DOWN UP
MOTORS ALIGNMENT
167
CALIBRATION
GOBO INDEX
MENU ENTER DOWN UP
MOTORS ALIGNMENT
141
FAN SPEED WHEN
DIMMER CLOSED
FANS SPEED
MENU ENTER DOWN UP
ONLY AT MIN LAMP POWER
3
LAMP POWER WHEN
DIMMER CLOSED
MIN LAMP POW.
MENU ENTER DOWN UP
1=65% 100=100%
10
GOBO WHEEL ALIGNMENT
To align Gobo wheel
CALIBRATION
GOBO
MENU ENTER DOWN UP
MOTORS ALIGNMENT
151
ARC 1200
XR300 BEAM
23
For technical personnel only.
To operate this menu:
-Connect the projector to the DMX controller (DMX SIGNAL MUST BE CORRECTLY RECEIVED)
- Reset the XR300 BEAM (reset from the MENU, not from the DMX controller!).
- While reset is running, press the MENU and ENTER keys at the same time.
XR300 BEAM FAR E.B. (Cod. 03.MB002.EB.LF) • FAR system • CMY • Electronic ballast
XR300 BEAM FAR (Cod. 03.MB002.LF) • FAR system • CMY • Electromagnetic ballast
XR300 BEAM E.B. (Cod. 03.MB002.EB.L) • CMY • Electronic ballast