User guide

27
Satellite Scan
• The Satellite scan option helps to add
and scan multiple satellites at a time with
the default parameters. It lists down the
available satellites in Static Database (Stored
Information). Whenever you set the focus
to a satellite its corresponding details are
displayed in the right side.
• Press the BACK button to return to the
previous menu.
• Press the EXIT button to exit the menu.
Add
• Press the 1 number button to enter Add Satellite menu and then press the
buttons to setting.
• Press the OK button to conrm and then the "Successfully Saved" message will be
displayed.
• Press the Exit button to return previous menu.
Edit
• Press the 2 number button to enter Edit Satellite menu and then press the
buttons to setting.
• Press the OK button to conrm and then the "Successfully Saved" message will be
displayed.
• Press the Exit button to return previous menu.
Scan
• Press the Red color button to enter Tuning Details and then press the OK button to
scan.
• Press the Exit button to return previous menu.
TP List
• Press the Green color button to enter Add Carrier menu and then press the OK button
to save your setting.
• Press the EXIT button to return previous menu.
Del
• Press the Yellow color button to delete the Satellite and then press the OK button to
conrm.
• Press the Yellow color button again to cancel the delete.
LNB
Setup
• Press the Blue color button to enter LNB mode and then press the OK button to save
your setting.
• Press the Blue color button again to return previous menu.