User guide

28
S/W Upgrade via OTA
1. Press the MENU button and then press the
buttons to select System Installation.
Press the button or the OK button to
conrm.
2. Press the buttons to select S/W
Upgrade via OTA and then press the
OK button to display the menu and then
"S/W searching inprogress" message will be
displayed.
3. If OTA data is available in AIR then the
downloading will be start with loader OSD.
Factory Default
Be careful when using this function, because
it will erase all the data and parameters that
are set earlier in the receiver. Once you made a
factory default they will have to re-install their
preferences.
1. Press the MENU button and then press the
buttons to select System Installation.
Press the button or the OK button to
conrm.
2. Press the buttons to select Factory
Default and then press the OK button to
display the conrmation menu.
3. Press the buttons to select Yes and
press the OK button to conrm the
password entry dialog will be displayed.
(Default password is 0000) If use the
buttons select No will return to the previous
menu.
4. After you entered the password in the menu
the "Successfully Completed" message will
be displayed.
5. Press the OK button to return to the
previous menu.
6. Press the EXIT button to exit the menu.