Warranty

ManualsBrandsDual-Lite ManualsOtherThermoplastic LED AC-Only Exit Sign

LIMITED WARRANTY

Limited Warranty (“Warranty”):

Subject to the exclusions set forth below, the Dual-Lite and Compass Lighting divisions of Hubbell

Lighting, Inc. (“Hubbell”) warrants to the original end user (“End User”) as specified in Hubbell’s shipment documents that its emergency

fixtures and/or emergency batteries, including light emitting diode (“LED”) fixtures, LED arrays and LED drivers (collectively, “Products”) will

be free from defects in material and workmanship which cause the Products to fail

to operate in accordance with the specifications set forth in the

documentation published or provided with the Products (the “Specifications”) for the respective time periods set forth in the emergency fixture

table and battery table attached hereto as Annex 1

(“Warranty Period”). The Full warranty period begins from date of shipment from Hubbell's

facilities. The Pro Rata warranty period begins on the date the Full limited warranty period ends.

An emergency battery, whether sold separately, or as part of an emergency fixture or as part of another Hubbell product, will be considered

defective only if it fails to perform for a full ninety (90) minutes during required annual testing. The emergency li

ghting warranty applies only

when (i) emergency fixtures or other Hubbell products containing batteries have been continuously connected to an AC input power source

within ninety (90) days of the date of shipment from Hubbell's facilities or (ii) batteries sold separately have been placed in fixtures continuously

connected to an AC input power source within 90 days of the date of shipment from Hubbell's facilities.

The LED arr

ays in the Products will be considered defective in material or workmanship only if a total of 15% or more of the individual LEDs in

the Products fail to illuminate. Hubbell warrants to the End User the fixture finish for a period of five (5) years from the date of shipment.

Hubbell will, at its sole option, repair or replace the defective finish if it exhibits cracking, peeling, excessive fading or corrosion defects during

the Warr

anty Period.

Exclusions:

This Warranty applies only when the Products have been properly handled, stored, wired, transported, installed, operated and

maintained in accordance with the applicable Specifications, including, without limitation, installation in applications in which ambient

temperatures are within the range of specified operating temperatures and operation within the electrical values shown on the Specifications.

Hubbell will shall have no responsibility under this Warr

anty for any failure of the Products that results from external causes including without

limitation: acts of nature; physical damage; exposure to adverse or hazardous chemicals or other substances; use of reactive cleaning agents

and/or harsh chemicals to clean the Products; environmental conditions; vandalism; fire; power failure, improper power supply, power surges or

dips, and/or excessive switching; fatigue failure or simil

ar phenomena resulting from induced vibrations, harmonic oscillation or resonance

associated with movement of air currents around the Product; animal or insect activity; fault or negligence of the purchaser of the Products, the

End User and/or any third parties not engaged by Hubbell, improper or unauthorized use, installation, handling, storage, alteration, maintenance

or service, including failure to abide by any product classifica

tions or certifications, or failure to comply with any applicable standards, codes,

recommendations, product specification sheets, use of Products with products, processes or materials supplied by the purchaser of the Products,

the End User or third parties, or any other occurrences beyond Hubbell's reasonable control. In addition, Hubbell shall have no responsibility

under this Warranty for any substantial deterioration in the Product finish that is ca

used by failure to clean, inspect or maintain the finish of the

Products. During the Warranty Period some staining, chalking or fading may occur. This is normal aging of the finish and is not a

manufacturing defect; therefore it is not covered by this Warranty. Neither polycarbonate nor acrylic material used in the Products is warranted

against yellowing, as yellowing may naturally occur over time due to normal aging. If the Products are used on existing foundations, anchorages

or structures, the purchaser of the Products and/or the End User is solely responsible for the structural integrity of such existing foundations,

anchorages or structures and all consequences arising from their use.

Adequate records (as determined by Hubbell in its sole discretion) of operating history, maintenance, and/or testing must be kept by the End

User

and provided to Hubbell upon request to substantiate that the Products have failed to comply with the terms of this Warranty. The Products are

not warranted against costs that may be incurred in connection with changes or modifications to the Products required to accommodate site

conditions and/or faulty building construction or design. In addition, the Products are not warranted against cost resulting from installati

on of

third party components, failures of third party supplied components, or failures of Hubbell supplied Products caused by third party supplied

components. This Warranty is not applicable to any product(s) which are not installed and operated in accordance with the current edition of The

National Electric Code (NEC), the Standards for Safety of Underwriters’ Laboratory, Inc. (UL), or the standards for the American National

Standards Insti

tute (ANSI), and with Hubbell instructions and guidelines for the Product. THIS WARRANTY IS VOID WITH RESPECT TO

ANY PRODUCT IF THE PRODUCT IS NOT USED FOR THE PURPOSE FOR WHICH IT WAS DESIGNED OR IF ANY REPAIRS OR

ALTERATIONS ARE MADE BY ANY PERSON NOT AUTHORIZED BY HUBBELL IN WRITING.

Except as otherwise set forth herein, Hubbell does not warrant ballasts, battery packs, lamps, photocells, occupancy sensors, low voltage

indicators, fuses, sur

ge suppressors, surge protection devices and other third party devices that are not manufactured by Hubbell, which are

covered by the applicable third party manufacturer warranty (if any). Such third party manufacturer shall be solely responsible for the costs

related to any claims associated with any such devices.

Remedy:

If the Product(s) fail to comply with the terms of this Warranty and the End User (and the purchaser of the Product(s) if different from

the End User) has fully complied with all of the obligations under this Warranty and the Terms and Conditions of Sale for Hubbell Lighting, Inc.

(which are available at www.hubbelllighting.com/terms_and_conditions

) including, without limitation, payment in full in respect of the Products,

Hubbell, at its sole option, will repair or replace the Product(s) with the same or a functionally equivalent Product(s) or component part(s).

Specifically, Hubbell will repair the Product, replace with a similar or like Product (as determined by Hubbell in its sole discretion), or issue a

Summary of content (3 pages)

PAGE 1
LIMITED WARRANTY Limited Warranty (“Warranty”): Subject to the exclusions set forth below, the Dual-Lite and Compass Lighting divisions of Hubbell Lighting, Inc.
PAGE 2
credit to the End User which may be used for future Hubbell product purchases. (The amount of such credit shall be calculated by Hubbell at its sole discretion). Hubbell reserves the right to use new, reconditioned, refurbished, repaired or remanufactured products or parts in the repair or replacement of any Product covered by this Warranty.
PAGE 3
Annex 1 EMERGENCY FIXTURE TABLE EMERGENCY FIXTURE WARRANTY TERM 1 Exit Signs - Electric 5 Years Full Exit Signs - Self Luminous 10 or 20 Years Full 2 Emergency Units 3 Years Full LED Lamps in Normally-Off Emergency Units Lifetime Emergency Units with Spectron or DLC Approval 5 Years Full Combination Unit/Exit 3 Years Full LED Lamps in Emergency Unit Section Lifetime Combination Unit/Exit with Spectron 5 Years Full Remote Heads/Accessories 1 Year Full Replacement Parts (except batteries)