Specification Sheet

ManualsBrandsDual-Lite ManualsOtherDual-Lite 4 Light LED Indoor / Outdoor Wall Sconce Emergency Light

Application

The PG is an indoor/outdoor, die-cast architectural emergency unit.

It is a wet location listed, emergency luminaire with high-output LED

technology that provides path of egress illumination for mounting over

entrance/exit ways and perimeter walkways. Spectron® self-testing/self-

diagnostic electronics are included standard. A battery heater for cold

temperature operation is available as an option.

Construction

Housing and mounting plate are constructed of 0.125" die-cast

aluminum and 0.125" closed-cell, medium density, neoprene gasket.

The acrylic lens allows 92% light transmission. The reﬂector is electro-

polished aluminum with 95% reﬂectance. Housing ﬁnish is powder

coated electro-deposition paint available in four colors: dark bronze,

white, platinum silver and black.

Installation

Universal housing knockouts for mounting to standard 31/2" and 4"

octagon and 4" square electrical boxes. A 1/2" – 1/4 NPT threaded

conduit opening is provided at the top of the housing and sealed with a

closure plug. The back plate mounts to the wall surface using installer

supplied hardware. The housing “snaps” to the back plate by a “pin and

socket” arrangement, and is secured with two Fillister head screws. AC

Lockout feature prevents battery discharge prior to initial unit power-up

saving installation time.

Lamps

Four high-output, long life LED lamps arranged in redundant pairs.

Compliances

UL 924 Listed (emergency models only)

UL Wet Location Listed

NFPA 101 Life Safety Code

NFPA 70 National Electrical Code

OSHA

U.S. Patent No. D627,916.

Warranty

Three-years full for unit. electronics and battery.

Indoor/Outdoor Emergency Lighting Unit

White

Platinum Silver

Dark Bronze

Black

Reference "Remote Heads and Fixtures" speciﬁcation

sheet for information on matching PG remote

PGR Remote LED

Catalog Number

Comments Type

FEATURES

ORDERING GUIDE

Series

W White

Z Dark Bronze

P Platinum Silver

B Black

Finish

HTR Battery Heater

(Add Sufﬁx to Model)

Options

HTR

Summary of content (2 pages)

PAGE 1
PG Indoor/Outdoor Emergency Lighting Unit FEATURES Catalog Number Application The PG is an indoor/outdoor, die-cast architectural emergency unit. It is a wet location listed, emergency luminaire with high-output LED technology that provides path of egress illumination for mounting over entrance/exit ways and perimeter walkways. Spectron® self-testing/selfdiagnostic electronics are included standard. A battery heater for cold temperature operation is available as an option.
PAGE 2
PG Indoor/Outdoor Emergency Lighting Unit specifications Electronics Upon failure of the normal utility power, a solid-state transfer switch automatically activates the emergency lamp. Upon resumption of the normal utility power, the battery is disconnected from the load and recharged through a solid-state charging unit. A low voltage battery disconnect feature protects the battery from severe damage during prolonged power failures.