Use And Care Manual

SYMBOLS
Some of the following symbols may be used on this tool. Proper interpretaon
of these symbols will allow you to operate the tool beer and safer.
SYMBOL NAME DESIGNATION/EXPLANATION
Volts Voltage
Amperes Current
Hertz Frequency
Wa Power
Minutes Time
Alternang
Current
Type of Current
Direct Current Type of Current
No Load speed Rotaonal speed at no load
Class II Construc
-
on
Double-insulated Construcon
RPM
Per Minute Revoluons per minute
Wet Condions
Alert
Do not expose to rain or use in damp areas.
Read User
Manual
To reduce the risk of injury, user must read and understand user’s
manual before using the product.
Eye Protecon Always wear safety goggles or safety glasses with side shields.
Face Mask Wear full-face mask when operang this product.
Ear Protecon To protect your ears for the noise and ying debris, always wear
ear protectors or ear plugs.
Gloves Always wear gloves when operang this product.
No Hands Symbol Failure to keep your hands away from the blades will result in
serious injury.
Danger Indicates an immediate hazardous situaon. Must avoid to pre
-
vent death or serious injury.
Warning Indicates a potenally hazardous situaon, which, if not avoided
may result in serious injury.
Cauon Indicates a potenally hazardous situaon, which, if not avoided
may result in minor injury.
WARNING!
The operation of any power tool can result in foreign objects flying
into your eyes, which can result in severe injury. Always wear safety
goggles or safety glasses with side shields and when needed it, a full
face mask.
9
DUALSAW CS450 MANUAL 4_30_13.indd 10 7/8/13 3:00 PM