Use And Care Manual

ATTACHING THE FRONT GRIP
• Screw front grip into saw as shown in figure 2.
• Use nut to tighten the hand grip.
ASSEMBLY
WARNING!
The DUALSAW uses specially designed blades. No other types of blades should
ever be used on this tool. Other blades will not operate safely on this saw and
could result in serious personal injury.
WARNING!
Be sure to rst unplug the electric cord from the electrical outlet and allow
blades to cool before removing blades.
1. Push the spindle lock to secure
the blade. (Fig. 3)
2. Use the blade wrench to unscrew
the lock nut. (Fig. 4)
Fig. 2
Fig. 4
Fig. 3
REMOVING THE BLADES
12
DUALSAW CS450 MANUAL 4_30_13.indd 13 7/8/13 3:00 PM