Use And Care Manual
LUBRICATION STICKS
• Use the lubricaon scks to protect your blades and the material when cut-
ng so metals such as aluminum or copper.
• For your convenience, we have included 10 lubricaon scks in your
package. Addional lubricaon scks can be purchased at www.dualsaw.com.
• Insert a lubricaon sck in the lubricaon unit as shown in gure 20.
• Use the lubricaon knob to feed the wax into the blades as need it
OPERATION
Fig. 20
MAINTENANCE
GENERAL MAINTENANCE
• Tool service must be performed by qualied repair personnel. Service or
maintenance performed by unqualied personnel could result in a risk of in-
jury. Contact Customer Service for informaon on repairs.
• When servicing a tool, always use only idencal replacement parts. Follow
instrucons in the maintenance secon of this manual. Use of unauthorized
parts or failure to follow maintenance instrucons may create a risk of electric
shock or injury. Certain cleaning agents such as gasoline, carbon tetrachlo-
ride, ammonia, etc. may damage plasc parts.
• Avoid using solvents when cleaning plasc parts. Most plascs are suscepble
to damage from various types of commercial solvents and may be damaged
by their use. Use a clean cloth to remove dirt, carbon dust etc.
• It is a known fact that electric tools are subject to accelerated wear and pos-
sible premature failure when they are used to work on ber glass boats and
sports cars, wallboard, spackling compounds or plaster. The chips and grind-
ings from these materials are highly abrasive for electrical tool parts, such as
bearings, brushes, commutators, etc. Consequently, clean the tool even more
intensely aer working these materials.
CLEANING AND STORAGE
• Resin and other materials that easily become aached to the sides of the
blade oen cause the blade to overheat. This means that it can buckle or even
split. You must therefore always keep the blade clean. Wash it with a solvent.
Never try to scrape the blade clean with a hard object.
18
DUALSAW CS450 MANUAL 4_30_13.indd 19 7/8/13 3:00 PM