LS 100_V1-0516 LS 100 Aktivlautsprecher-Set Bedienungsanleitung
Das Vorwort Diese Bedienungsanleitung hilft Ihnen beim bestimmungsgemäßen und sicheren Gebrauch Ihrer Lautsprecher, im folgenden Anlage oder Gerät genannt. Die Zielgruppe dieser Bedienungsanleitung Die Bedienungsanleitung richtet sich an jede Person, die das Gerät aufstellt, bedient, reinigt oder entsorgt.
Inhaltsverzeichnis Inhaltsverzeichnis Das Vorwort ...................................................................2 Die Zielgruppe dieser Bedienungsanleitung....................2 Die Gestaltungsmerkmale dieser Bedienungsanleitung..2 Inhaltsverzeichnis .........................................................3 Geräteübersicht .............................................................4 Der Lieferumfang.............................................................
Geräteübersicht Geräteübersicht Master-Lautsprecher L 1 VOLUME Lautstärke einstellen 2 FUNCTION Funktion wählen: PHONO, AUX 3 PHONO IN Phonoanschluss, Cinch, stereo 4 AUX IN Anschluss externe Quelle, Cinch, stereo 1 5 SPEAKER R Anschluss Lautsprecher R 2 6 POWER Einschalten, Ausschalten 7 GND Masseanschluss (Schirmung gegen Brummen) 8 DC IN Anschluss Netzteil, 18 V, 2 A 3 4 4 - Typenschild (Rückseite) Der Lieferumfang 5 Bitte stellen Sie sicher, dass alle nachfolgend aufgef
Hinweise zur Handhabung Hinweise zur Handhabung Lesen Sie bitte alle Sicherheitshinweise sorgfältig durch und bewahren Sie diese für spätere Fragen auf. Befolgen Sie immer alle Warnungen und Hinweise in dieser Bedienungsanleitung und auf der Rückseite des Gerätes. Sicherheitshinweise Vorsicht im Umgang mit dem Netzadapter! Das Gerät darf nur an eine Netzspannung von 100 240 V~, 50/60 Hz angeschlossen werden. Versuchen Sie niemals, das Gerät mit einer anderen Spannung zu betreiben.
Hinweise zur Handhabung Es dürfen keine offenen Brandquellen, wie z.B. brennende Kerzen auf das Gerät gestellt werden. Lassen Sie Kinder niemals unbeaufsichtigt dieses Gerät benutzen. Überlassen Sie Wartungsarbeiten stets qualifiziertem Fachpersonal. Andernfalls gefährden Sie sich und andere. Das Gerät bleibt auch in ausgeschaltetem Zustand Standby mit dem Stromnetz verbunden. Ziehen Sie den Netzstecker aus der Steckdose, falls Sie das Gerät über einen längeren Zeitraum nicht benutzen.
Hinweise zur Handhabung Der Standort darf nicht in Räumen mit hoher Luftfeuchtigkeit, z.B. Küche oder Sauna, gewählt werden, da Niederschläge von Kondenswasser zur Beschädigung des Gerätes führen können. Das Gerät ist für die Verwendung in trockener Umgebung und in gemäßigtem Klima vorgesehen und darf nicht Tropf- oder Spritzwasser ausgesetzt werden. Beachten Sie, dass die Gerätefüße u.U. farbige Abdrücke auf bestimmten Möbeloberflächen hinterlassen könnten.
Wie Sie das Gerät zum Betrieb vorbereiten Wie Sie das Gerät zum Betrieb vorbereiten Die Lautsprecher verbinden Stecken Sie das Audiokabel des SPEAKER R in den Anschluss des SPEAKER L (5). Hinweis: Verwenden Sie bitte nur die vorgesehenen Kabel bzw. Steckverbindungen zum Anschluss. Beschädigungen des Geräts oder Fehlfunktionen könnten die Folge sein.
Wie Sie das Gerät zum Betrieb vorbereiten Steckernetzteil. Wenn das Gerät längere Zeit nicht benutzt wird, z.B. vor Antritt einer längeren Reise, ziehen Sie das Steckernetzteil. Wenn das Gerät an die Netzspannung angeschlossen ist, sind aufgrund der Standby-Funktion Teile des Gerätes in Betrieb. Um das Gerät ganz auszuschalten, muss das Steckernetzteil gezogen werden. Eine externe Tonquelle anschließen Sie können den Ton eines externen Gerätes (z. B.
Wie Sie das Gerät bedienen Wie Sie das Gerät bedienen Wie Sie das Gerät ein- und ausschalten Schalten Sie das Gerät mit POWER ON OFF 6 ein. Dazu Schalter auf ON drücken/stellen. Um das Gerät auszuschalten, Schalter auf OFF drücken/stellen. In dieser Stellung ist das Gerät ausgeschaltet aber mit dem Stromnetz verbunden. Wie Sie die Lautstärke einstellen Drehen Sie den VOLUME 1, um die gewünschte Lautstärke einzustellen. Nach rechts: lauter.
Wie Sie das Gerät reinigen Wie Sie das Gerät reinigen Stromschlag! Um die Gefahr eines elektrischen Schlags zu vermeiden, dürfen Sie das Gerät nicht mit einem nassen Tuch oder unter fließendem Wasser reinigen. Netzstecker vor Reinigung ziehen! Keine der folgenden Substanzen verwenden: Salzwasser, Insektenvernichtungsmittel, chlor- oder säurehaltige Lösungsmittel (Salmiak), Scheuerpulver. Mit dem Baumwolltuch sanft über die Oberfläche reiben, bis diese vollständig trocken ist.
Wie Sie Fehler beseitigen Wie Sie Fehler beseitigen Wenn das Gerät nicht wie vorgesehen funktioniert, überprüfen Sie es anhand der folgenden Tipps. Wenn Sie die Störung auch nach den beschriebenen Überprüfungen nicht beheben können, nehmen Sie bitte Kontakt mit dem Hersteller auf. 12 Probleme mit dem Gerät Symptom Mögliche Ursache/Abhilfe Gerät lässt sich nicht einschalten. Das Gerät wird nicht mit Strom versorgt. Schließen Sie das Netzkabel richtig an die Netzsteckdose an. Verwenden Sie ggf.
Wie Sie Fehler beseitigen Technische Daten Technische Änderungen und Irrtümer vorbehalten. Abmessungen Gerät (B x H x T): ca. 150 mm x 230 mm x 190 mm Gewicht: ca.
Wie Sie den Hersteller erreichen Wie Sie den Hersteller erreichen Entsorgung des Gerätes DGC GmbH Graf-Zeppelin-Str. 7 Altgeräte sind kein wertloser Abfall. Durch umweltgerechte Entsorgung können wertvolle Rohstoffe wieder gewonnen werden. Erkundigen Sie sich in Ihrer Stadtoder Gemeindeverwaltung nach Möglichkeiten einer umwelt- und sachgerechten Entsorgung des Gerätes. D-86899 Landsberg www.dual.