XDCPA11BT INSTALLATION/OWNER’S MANUAL Multimedia Receiver with Android Auto™ and CarPlay™ featuring a 10.
Copyright Notes This product incorporates copyright protection technology that is protected by method claims of certain U.S. patents and other intellectual property rights owned by Macrovision Corporation and other rights owners. Use of this copyright protection technology must be authorized by Macrovision Corporation, and is intended for home and other limited viewing uses only unless otherwise authorized by Macrovision Corporation. Reverse engineering or disassembly is prohibited.
XDCPA11BT PREPARATION Table of Contents Page Warning Statement . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Safety Information/Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Preparation/Mounting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Wiring Diagram . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Control Locations. . . . . . . . . . . . . . . . . . . . . . . . . .
XDCPA11BT PREPARATION WARNING Upon installation of this monitor/media player (“unit”) into a vehicle, the driver of the vehicle must not operate this unit by watching videos or playing video games while driving. Failure to follow this instruction could lead to driver distraction which could result in serious injury or death to the vehicle’s occupants or persons outside the vehicle and/or property damage.
XDCPA11BT OPERATION Safety Information Please read all instructions carefully before attempting to install or operate. Due to its technical nature, it is highly recommended that your DUAL XDCPA11BT is installed by a professional installer or an authorized dealer. This product is only for use in vehicles with 12VDC negative ground only. To prevent damage or injury: • Make sure to ground the unit securely to the vehicle chassis ground. • Do not remove the top or bottom covers of the unit.
XDCPA11BT INSTALLATION Preparation Before You Start • Disconnect negative battery terminal. Consult a qualified technician for instructions. • Avoid installing the unit where it would be subject to high temperatures, such as from direct sunlight, or where it would be subject to dust, dirt or excessive vibration. Getting Started • Insert the supplied keys into the slots as shown, and slide the unit out of the mounting sleeve. • Install mounting sleeve into opening, bending tabs to secure.
YELLOW LEFT REAR(+) LEFT REAR (-) RIGHT REAR(+) GREEN GREEN/BLACK VIOLET CHASSIS GROUND(-) BATTERY 12(+) LLUMINATION(+) BLACK YELLOW ORANGE REMOTE TURN-ON(+) BLUE/WHITE GRAY(RED CAP) SWC INPUT PARKING BRAKE(-) PINK VIOLET/WHITE REVERSE(+) BLUE POWER ANTENNA (+) GNITION 12V(+) RED VIOLET/BLACK RIGHT REAR(-) RIGHT FRONT(+) RIGHT FRONT (-) GRAY GRAY/BLACK LEFT FRONT(+) LEFT FRONT(-) WHITE WHITE/BLACK CAMERA 12V GND CAMERA IN SWC IN REVERSE(+) ILLUMINATION BATTERY(+) GROUND(-) ACC+ LIN
XDCPA11BT OPERATION Control Locations 1 2 3 4 5 6 7 8 The radio display features the following functions and displays: 1 2 Voice command button 3 4 MODE button 5 6 BAND button 7 MENU Button – Press to enter Main Menu. Press again from Main Menu to return to last source. 8 Reset Button-To resolve abnormal operation or if the unit is inoperable, use the tip of a pen to press the RESET button. The unit will Reset Button the main processor to the default settings.
XDCPA11BT OPERATION Remote Control Preparation 1 2 16 3 15 4 5 6 14 7 8 13 9 10 12 11 1 2 POWER button-Switching the device on/off 3 4 Tune/Track Down 5 6 MUTE button-Muting the device/cancelling mute 7 Preset 1~6 8 Repeat button 9 Play/Pause button 10 Talk button 11 MODE button 12 End Call button 13 Random button 14 BAND button 15 Tune/Track Up 16 Microphone button Volume Up OK button-Confirm a selection with OK in each case Volume Down 8
XDCPA11BT OPERATION General Operation Power On/Off Volume Momentarily press unit off. to turn the unit on. Press and hold to turn the Rotate the volume knob to increase or decrease the volume level. Mute Momentarily press MUTE to silence the audio. Momentarily press MUTE again to return to the previously selected volume. Rotating the volume knob while the volume is muted will also cancel the mute function.
XDCPA11BT OPERATION General Operation Setup Menu From the Main Menu screen, select Settings to access the Setup menu and select from eight categories represented by the icons on the top of the screen: General, Audio, Display, Others. Select the category, and adjust any of the available options using the touch screen. General: • Adjust the date and time- Day, Month, Year, Hour, Minute and Format. • Time Format- Select between 12-Hour and 24-Hour Time Format. • Beep Tone - Turn the Beep Tone On or Off.
XDCPA11BT OPERATION AM/FM Tuner Operation 1 2 3 4 5 6 7 8 Radio Operation Main Menu 1 Current Mode Indicator 2 Local / Distance 3 Seek Tune Down 4 Seek Tune Up 5 Preset Stations 6 FM 7 AM 8 AS/PS 9 EQ 10 Keypad 11 11 9 10 11 Select the Radio icon from the Main Menu screen. Press to return to Main Menu screen. Displays current mode of operation. Press to toggle between Local and DIstance tuning. Press to automatically tune to a lower frequency.
XDCPA11BT OPERATION USB Operation 1 2 3 4 5 6 7 8 USB Main Menu 1 Current Mode Indicator 2 EQ 3 Search 4 List 5 Repeat 6 Progress bar 7 Previous File/Track 8 Play / Pause 9 Next File / Track 10 Random 11 9 10 11 To play audio files from a USB device, connect a device to the rear USB cable and playback will begin automatically. To return to USB playback from another mode of operation, select the USB icon in the Main Menu. Press to return to Main Menu screen. Displays current mode of operation.
XDCPA11BT OPERATION Media Compatibility File Type File System FAT MP3 FAT 12 X FAT 16/FAT 32 .mp3/.MP3/.Mp3/.mP3 File Extension MPEG Format Sampling Frequency Bitrate Other Information MP3 ID3 TAG .rmp/.m4a X MPEG 1 MPEG 2 MPEG 2.5 MPEG 1 32/44.1/48kHz MPEG 2 12/16/22.05/24kHz MPEG 2.5 8/11.025/12kHz MPEG 1 32 ~ 320kbps MPEG 2 8 ~ 160kbps MPEG 2.
XDCPA11BT OPERATION Media Compatibility Media Compatibility The following types of files are not compatible: • MP3 PRO format, MP3 playlists • RMP format • AAC, protected AAC, M4A format MP3 playback sequence begins in the root folder of the USB device. Any empty folders or folders that do not include MP3 files are skipped. Playback Order Compatible Recording Formats ISO9660 standards: • Maximum nested folder depth is 8 (including the root folder).
XDCPA11BT OPERATION Bluetooth Operation 1 2 3 4 5 7 8 9 Preparation Before you can use a Bluetooth device, it must be paired and connected. Make sure that Bluetooth is activated on your device before you begin the pairing process. Pairing a New Device The unit broadcasts the pairing signal constantly when no devices are currently connected. Complete the pairing sequence from your Bluetooth device. Refer to the owner's manual for your device for more details. The device name is "XDCPA11BT".
XDCPA11BT OPERATION Bluetooth Operation 10 Contacts 6 Press "Contacts" to access the contacts of your device. Call Log 7 Press the Call Log to show( Dialed, Missed and Received Calls ). Music 8 Press"Music"on the Bluettoth Menu, to play music on your unit using your device, through Bluetooth connection. Setup 9 Press "Setup" to access Bluetooth settings. 11 12 End Call 10 Bluetooth Music 11 Microphone 12 13 14 15 Turn the Microphone voice On or Off.
XDCPA11BT OPERATION Apple CarPlay Operation Apple CarPlay™ is a smart interface for iPhone, allowing you to voice-control (via Siri) music, navigation, phone and messaging apps - significantly reducing driver distraction. Phone - Use Siri to make calls, return missed calls, listen to voicemail messages, and view the caller ID on the receiver’s screen. Messages - Ask Siri to send, read, and reply to text messages.
XDCPA11BT OPERATION Apple CarPlay Operation When the CarPlay menu is displayed, the home button in the lower left corner work just like the home button on your iPhone. Press and hold it to summon Siri and begin your voice commands. At any time during CarPlay operation, you can press this button momentarily to return to the main CarPlay menu screen. Press any Application button on the main CarPlay menu to access that operation directly.
XDCPA11BT OPERATION Android Auto™ Operation Android Auto™ brings the most useful apps to your phone screen or your compatible car display, in a format that makes it easy for you to keep your main focus on driving. You can control things like navigation and maps, calls and text messages, and music. Google Assistant With your Google Assistant on Android Auto, you can keep your eyes on the road and your hands on the wheel while using your voice to help you with your day.
XDCPA11BT OPERATION Android Auto™ Operation Using Android Auto™ The Android Auto™ home screen displays personalized information, like time to your destination, reminders, recent calls incoming messages, the song you're listening to, and Google Now cards. When the Android Auto™ menu is displayed, you can say "OK Google" or select the microphone in the upper right corner to talk to Google.
XDCPA11BT OPERATION Media Card Operation 1 2 3 4 5 6 7 8 Media Card Main Menu 1 Current Mode Indicator 2 EQ 3 Search 4 List 5 Repeat 6 Progress bar 7 Previous File/Track 8 Play / Pause 9 Next File / Track 10 Random 11 21 9 10 11 To play audio files from a Media Card device. To return to Media Card playback from another mode of operation, select the Media Card icon in the Main Menu. Press to return to Main Menu screen. Displays current mode of operation.
XDCPA11BT OPERATION Rear RCA Input Auxiliary Input Connect an optional audio source into the RCA (rear) input. Select auxiliary input from the Main Menu to listen to audio. Adjust volume on the external audio source as needed (if connected to the headphone output of the device). Rear Camera Operation - (Optional) Using Rear Camera Connect an optional rear camera to the Camera Input (Black RCA connector). Refer to the wiring diagram for details.
XDCPA11BT OPERATION SWC Input Operation The built-in SWC Interface is compatible with PAC steering wheel control modules. The PAC SWI-RC is recommended. A third-party adapter must be used in order for the XDCPA11BT to be compatible with any steering wheel controls. The following controls are available for most vehicles. 1. Restudy 4. Seek/Track Down (-) 7. Volume Down (-) 2. SRC 5. Mute 8. Band 3. Seek/Track Up (+) 6. Volume Up (+) 9. BT Talk 10.
XDCPA11BT OPERATION Troubleshooting General Problem Unit will not turn on (no power) Unit has power (but no sound) Unit blows fuse(s) Unit has audio (but no video) IR remote does not work Cause Action Yellow wire not connected or incorrect voltage Red wire not connected or incorrect voltage Check connections for proper voltage (11~16VDC) Black wire not connected Check connection to ground Fuse blown Replace fuse(s) Speaker wires not connected Check connections at speakers One or more speaker w
XDCPA11BT OPERATION Specifications FM Tuner Tuning range: 87.5MHz-108MHz Usable sensitivity: 10dBf 50dB quieting sensitivity: 20dBf Stereo separation @ 1kHz: 38dB Frequency response: 30Hz-13kHz AM Tuner Tuning range: 530kHz-1710kHz Usable sensitivity: 24uV Frequency response: 30Hz-2.3kHz Front USB Compatibility: High Speed USB 2.0 USB Class: Mass storage class Monitor Panel size: 10.
XDCPA11BT OPERATION Limited One Year Warranty This warranty gives you specific legal rights. You may also have other rights which vary from state to state. Dual Electronics Corp. warrants this product to the original purchaser to be free from defects in material and workmanship for a period of one year from the date of the original purchase. Dual Electronics Corp.
Dual Electronics Corp. Toll Free: 1-866-382-5476 Monday-Friday, 9AM-5PM EST www.dualav.com ©2019 Dual Electronics Corp. All rights reserved.