Owner`s manual

18
AXD530
Bluetooth Operation
BeforeyoucanuseaBluetoothdevice,itmustbepairedand
connected.MakesurethatBluetoothisactivatedonyour
devicebeforeyoubeginthepairingprocess.
TheAXD530broadcaststhepairingsignalconstantly
whennodevicesarecurrentlyconnected.Completethe
pairingsequencefromyourBluetoothdevice.Refertothe
owner'smanualforyourdeviceformoredetails.
The device name is "DUAL BT"
The Bluetooth passcode "1234"
Note:TheAXD530canbeinanymodeofoperation
whenpairingisperformed.
Ifadeviceiscurrentlyconnected,pressandhold
to
disconnectthecurrentdevicebeforeanewdevicecan
bepaired.Thenbeginthepairingsequencefromthenew
Bluetoothdevice.
Preparation
Pairing a New Device
Pairing Additional
Devices
MostBluetoothdevicessupporttheauto-connectfeature,andwillconnectautomatically
ifthedeviceisinrangewhentheAXD530ispowered-on.Ifyourdevicewaspreviously
pairedbutdoesnotconnect,usetheseinstructionsbelow.
•IfyourmostrecentlyconnectedBluetoothdevicebecomesdisconnectedordoesnot
reconnect,press
fromBluetoothmodetoreconnectyourmobiledevice.
•Toconnectapreviouslypaireddevicethatwasnotrecentlyconnected:
1)Ifapplicable,pressandhold
todisconnectanyconnectedmobiledevices.
2)FromBluetoothmode,pressSELECT."PairedDevices"willappearontheLCD.
3)Turnthevolumeknobtocyclethroughthelistofdevices.
4)PressSELECT or
toconnecttothedesireddevice.Itmustbeinrangetoconnect.
Note:IftheAutoConnectsetupmenusettingissettoOFF,youmustpress
to
connectyoudeviceafterpairing,andeachtimetheAXD530ispowered-on.
Connecting a Paired Device
Disconnecting a Device
Pressandholdfor3secondstodisconnectaconnecteddevice.Thedevicewillremain
pairedandappearinthePAIREDDEVICESmenubutwillnotbeconnected.
Pairing a Device