DAB 32 V1_01-13 Digital-Radio für DAB+/UKW DAB 32 Bedienungsanleitung
Das Vorwort Diese Bedienungsanleitung hilft Ihnen beim bestimmungsgemäßen und sicheren Gebrauch Ihres Radios, im folgenden Anlage oder Gerät genannt. Die Zielgruppe dieser Bedienungsanleitung Die Bedienungsanleitung richtet sich an jede Person, die das Gerät aufstellt, bedient, reinigt oder entsorgt. Die Gestaltungsmerkmale dieser Bedienungsanleitung Verschiedene Elemente der Bedienungsanleitung sind mit festgelegten Gestaltungsmerkmalen versehen.
Inhaltsverzeichnis Sicherheit und Aufstellen des Geräts ......................... 4 Sicherheit ........................................................................ 4 Die Beschreibung des Geräts ...................................... 7 Der Lieferumfang ............................................................ 7 Die besonderen Eigenschaften des Geräts ....................7 Bedienelemente ..............................................................
Sicherheit und Aufstellen des Geräts Sicherheit und Aufstellen des Geräts Lesen Sie bitte alle Sicherheitshinweise sorgfältig durch und bewahren Sie diese für spätere Fragen auf. Befolgen Sie immer alle Warnungen und Hinweise in dieser Bedienungsanleitung und auf der Rückseite des Geräts. Sicherheit Vorsicht im Umgang mit dem Netzadapter! Das Gerät darf nur an eine Netzspannung von 100 240 V~, 50/60 Hz angeschlossen werden. Versuchen Sie niemals, das Gerät mit einer anderen Spannung zu betreiben.
Sicherheit und Aufstellen des Geräts 5 Lassen Sie Kinder niemals unbeaufsichtigt dieses Gerät benutzen. Überlassen Sie Wartungsarbeiten stets qualifiziertem Fachpersonal. Andernfalls gefährden Sie sich und andere. Die Anschlusskontakte auf der Geräterückseite nicht mit metallischen Gegenständen oder den Fingern berühren. Die Folge können Kurzschlüsse sein. Das Gerät bleibt auch in ausgeschaltetem Zustand Standby mit dem Stromnetz verbunden.
Sicherheit und Aufstellen des Geräts 6 Sie dürfen das Gerät nur in waagerechter Position betreiben. Nicht im Freien verwenden! Halten Sie das Gerät von Geräten fern, die starke Magnetfelder erzeugen. Bei Verwendung von Energiesparlampen in unmittelbarer Nähe kann ggf. die Funktion des Gerätes beeinträchtigt werden. Stellen Sie keine schweren Gegenstände auf das Gerät. Legen Sie eine rutschfeste Unterlage unter die Gerätefüße, um Abdrücke auf Möbeloberflächen zu vermeiden.
Die Beschreibung des Geräts Die Beschreibung des Geräts Der Lieferumfang Bitte stellen Sie sicher, dass alle nachfolgend aufgeführten Zubehörteile vorhanden sind: DAB+Radio-Gerät, Netzteil, diese Bedienungsanleitung. Die besonderen Eigenschaften des Geräts Mit dem Digital-Radio steht ein neues Format zur Verfügung, durch welches man kristallklaren Sound ohne Rauschen und Knistern hören kann. Das Gerät besitzt ein OLED-Display mit einstellbarer Helligkeit.
Die Beschreibung des Geräts Bedienelemente 5 2 3 8 6 7 1 4 8 10 15 9 14 12 11 13
Die Beschreibung des Geräts 1 ON/STDBY Einschalten, Ausschalten des Geräts Standby; Wecker ausschalten 2 MODE Wahlschalter Digitalradio DAB, Analogradio FM, AUX 3 PRESETS Programmierte Sender, PRESETs aufrufen (Taste drücken) bzw.
Wie Sie das Gerät zum Betrieb vorbereiten Wie Sie das Gerät zum Betrieb vorbereiten Wie Sie den Antennenempfang verbessern Die Anzahl und Qualität der zu empfangenden Sender hängt von den Empfangsverhältnissen am Aufstellort ab. Mit der DAB-/UKW-Teleskopantenne 15 kann ein ausgezeichneter Empfang erzielt werden. Diese Antenne muss in voller Länge auf den günstigsten Empfang ausgerichtet werden. Die Balkenaussteuerung zeigt die aktuelle Signalstärke.
Wie Sie das Gerät zum Betrieb vorbereiten Wählen Sie mit MODE 2 die Betriebsart AUX MODUS. Regeln Sie die Lautstärke am Gerät sowie am angeschlossenen externen Gerät. Hinweis: Ziehen Sie bei Nichtverwendung den Netzstecker aus der Steckdose. Ziehen Sie am Netzstecker und nicht am Kabel. Ziehen Sie vor Ausbruch eines Gewitters den Netzstecker aus der Steckdose. Wenn das Gerät längere Zeit nicht benutzt wird, z.B. vor Antritt einer längeren Reise, ziehen Sie den Netzstecker.
Wie Sie allgemeine Geräte-Funktionen bedienen Wie Sie allgemeine GeräteFunktionen bedienen Wie Sie das Gerät einschalten Ziehen Sie vor der Verwendung des Gerätes die Teleskopantenne 15 auf volle Länge aus. Drücken Sie die Taste ON/STDBY 1, das Gerät wird eingeschaltet. In STANDBY ist das Gerät ausgeschaltet aber bei Verwendung des Steckernetzteils mit dem Stromnetz verbunden. Hinweis: Nach dem erstmaligen Einschalten ist das Gerät im DAB-Radiobetrieb.
Wie Sie allgemeine Geräte-Funktionen bedienen Eco-Standby-Modus Das Gerät schaltet sich nach einiger Zeit ohne Wiedergabe bzw. ohne Signal automatisch in Standby. Drücken Sie die Taste ON/STDBY 1, um das Gerät wieder einzuschalten. Wie Sie die Sprache einstellen Drücken Sie die Taste MENU 4 und wählen Sie durch Drehen von SELECT 9 > Sprache. Bestätigen Sie jeweils durch Drücken von SELECT 9. Wählen Sie durch Drehen von SELECT 9 die Sprache und bestätigen Sie durch Drücken von SELECT 9.
Die DAB-Funktion Die DAB-Funktion Was ist DAB+ DAB+ ist ein neues digitales Format, durch welches Sie kristallklaren Sound ohne Rauschen hören können. Anders als bei herkömmlichen Analogradiosendern werden bei DAB mehrere Sender auf ein und derselben Frequenz ausgestrahlt. Dies nennt man Ensemble oder Multiplexe. Ein Ensemble setzt sich aus der Radiostation sowie mehreren Servicekomponenten oder Datendiensten zusammen, welche individuell von den Radiostationen gesendet werden. Infos z.B unter www.
Wie Sie das Gerät im DAB-Modus bedienen Wie Sie das Gerät im DABModus bedienen Wie Sie einen Suchlauf bei DAB durchführen Der automatische Suchlauf „Vollständiger Suchlauf“ scannt alle DAB – Kanäle und findet somit alle Sender, die im Empfangsgebiet ausgestrahlt werden. Drücken Sie die Taste SCAN 7. Alternativ: Drücken Sie die Taste MENU 4. Das Menü öffnet sich. Wählen Sie durch Drehen von SELECT 9 > Vollständiger Suchlauf. Bestätigen Sie durch Drücken von SELECT 9.
Wie Sie das Gerät im DAB-Modus bedienen Anwählen der programmierten Stationen PRESET-Taste 3 drücken „Progr. aufrufen“ erscheint im Display. Mit Drehen von SELECT 9 Programmplatz 1 – 10 wählen. Mit Drücken von SELECT 9 bestätigen. Haben Sie keinen Sender auf den gewählten Programmplatz gespeichert, erscheint „(Leer)“. Löschen einer Programmplatz-Speicherung Neuen Sender auf die jeweilige PRESET-Taste speichern.
Wie Sie das Gerät im DAB-Modus bedienen Wie Sie Informationen einblenden Mehrfaches Drücken der INFO-Taste 5 schaltet durch verschiedene Informationen, wie z.B. Programmtyp, Multiplexname, Frequenz, Signalfehlerrate, Datenbitrate, Programmformat, Datum, DLS, Zeit Interpret. Siehe S. 21. Signalstärke: 1 Die Markierung 1 zeigt den erforderlichen Pegel. Sender, deren Signalstärke unterhalb des erforderlichen Pegels liegt, senden kein ausreichendes Signal.
Wie Sie das Gerät im UKW-Modus bedienen Wie Sie das Gerät im UKWModus bedienen Wie Sie einen UKW/FM-Sender einstellen Um zu UKW/FM zu schalten, MODE 2 ggf. wiederholt drücken bis > FM Modus im Display erscheint. Im Display erscheint kurz „FM Modus“, danach die Frequenz und „Radio Text“, wenn ein Sender empfangen wird. Wird ein RDS-Signal empfangen, erscheint der Sendername und ggf. der Radiotext. Manuelle Senderwahl Drehen Sie SELECT 9 im UKW-Betrieb, um den gewünschten Sender einzustellen.
Wie Sie das Gerät im UKW-Modus bedienen Wie Sie UKW-Sender speichern Der Programm-Speicher kann bis zu 10 Stationen im FM-Bereich (UKW) speichern. Hinweis: Die gespeicherten Sender bleiben auch bei Stromausfall erhalten. Den gewünschten Sender einstellen. PRESET-Taste 3 lang drücken. „Progr. Speichern“ erscheint. Mit Drehen von SELECT 9 Programmplatz 1 – 10 wählen. Mit SELECT 9 bestätigen. Anwählen der programmierten Stationen PRESET-Taste 3 drücken „Progr. aufrufen“ erscheint im Display.
Wie Sie System-Einstellungen vornehmen Wie Sie System-Einstellungen vornehmen Wie Sie die Displaybeleuchtung einstellen Sie können die Displayhelligkeit sowohl bei Betrieb als auch für Standby einstellen. Drücken Sie die Taste MENU 4 und wählen Sie > Beleuchtung (SELECT drehen und drücken). Stellen Sie bei > Power on durch Drehen von SELECT 9 die Betriebshelligkeit in drei Schritten von Hoch, Mittel zu Niedrig ein. Bestätigen Sie durch Drücken von SELECT 9.
Wie Sie die Displayanzeigen aufrufen Wie Sie die Displayanzeigen aufrufen Durch Drücken der Taste INFO 5 können Sie z.B. folgende Informationen einblenden: DAB-Betrieb FM (UKW) - Betrieb Signalstärke Radiotext: durchlaufender Text mit zusätzlichen Informationen, die die Sender u. U.
Wie Sie Uhrzeit und Weckzeit einstellen Wie Sie Uhrzeit und Weckzeit einstellen Hinweis: Überprüfen Sie nach der Inbetriebnahme und der erstmaligen Nutzung des Radios die Uhrzeit und stellen Sie diese ggf. neu ein. Nach einem Netzausfall müssen Sie die Uhrzeit erneut einstellen. Wie Sie die Uhrzeit manuell einstellen Drücken Sie die Taste MENU 4 und wählen durch Drehen von SELECT 9 > Zeitmenü und danach > Zeit/Datum einstellen und bestätigen Sie jeweils durch Drücken von SELECT 9.
Wie Sie Uhrzeit und Weckzeit einstellen am Wochenende oder Wählen Sie durch Drehen von SELECT 9 die gewünschte Wecklautstärke und bestätigen Sie durch Drücken von SELECT 9. Wecker und Aus blinkt. Schalten Sie die Weckfunktion ein, indem Sie mit SELECT 9 zu > Wecker ein drehen und mit Drücken von SELECT 9 bestätigen. > Wecker gespeichert erscheint. Die Einstellung ist gespeichert. Die eingestellte Weckfunktion wird durch das Symbol im Display angezeigt.
Wie Sie Uhrzeit und Weckzeit einstellen Wecker nach Alarm ausschalten Wie Sie die SLEEP-Funktion benutzen Wecker ausschalten Sie können den Zeitraum in 15-Minuten-Schritten einstellen, nach dem sich das Gerät von 0 – 90 Minuten in jeder Betriebsart in Standby schaltet. Drücken Sie die Taste MENU 4 und wählen Sie > Sleep (SELECT drehen und drücken). Stellen Sie durch Drehen von SELECT 9 die gewünschte Sleep-Zeit ein und bestätigen Sie durch Drücken von SELECT 9.
Wie Sie das Gerät reinigen Wie Sie das Gerät reinigen Stromschlag! Um die Gefahr eines elektrischen Schlags zu vermeiden, dürfen Sie das Gerät nicht mit einem nassen Tuch oder unter fließendem Wasser reinigen. Vor dem Reinigen Netzstecker ziehen. ACHTUNG! Sie dürfen keine Scheuerschwämme, Scheuerpulver und Lösungsmittel wie Alkohol oder Benzin verwenden. Reinigen Sie das Gehäuse mit einem weichen, mit Wasser angefeuchteten Tuch.
Wie Sie Fehler beseitigen Wie Sie Fehler beseitigen Wenn das Gerät nicht wie vorgesehen funktioniert, überprüfen Sie es anhand der folgenden Tabellen. Symptom Mögliche Ursache/Abhilfe Es ist ein Störrauschen zu hören. In der Nähe des Geräts sendet ein Mobiltelefon oder ein anderes Gerät störende Radiowellen aus. Wenn Sie die Störung auch nach den beschriebenen Überprüfungen nicht beheben können, nehmen Sie bitte Kontakt mit dem Hersteller auf.
Technische Daten Probleme mit dem Radio Symptom Mögliche Ursache/Abhilfe Es wird kein Radiosender empfangen. Das Gerät befindet sich nicht im Radio-Modus. Taste MODE drücken. Es wird kein DABSignal empfangen. Überprüfen Sie, ob in der Region DAB Empfang möglich ist. Richten Sie die Antenne neu aus. Probieren Sie, andere Sender zu empfangen. Führen Sie einen Suchlauf durch. Der Ton ist schwach oder von schlechter Qualität.
Wie Sie den Hersteller erreichen Wie Sie den Hersteller erreichen Wie Sie das Gerät entsorgen DGC GmbH Graf-Zeppelin-Str. 7 Altgeräte sind kein wertloser Abfall. Durch umweltgerechte Entsorgung können wertvolle Rohstoffe wieder gewonnen werden. Erkundigen Sie sich in Ihrer Stadtoder Gemeindeverwaltung nach Möglichkeiten einer umwelt- und sachgerechten Entsorgung des Gerätes. D-86899 Landsberg www.dual.