32” WIDESCREEN LED TV MODEL NO.: DL-TQL32R1-002 USER MANUAL Please read this manual carefully before using, and keep it for future reference. Dual provide 2 years pick up and return warrantee service for this product, If there is any technical problem please call helpdesk: 00800-34448378 .During office hours.
TABLE OF CONTENTS IMPORTANT INSTRUCTIONS SAFETY INFORMATION...................................................................................................2-3 ACCESSORIES………..........................................................................................................4 FEATURES....................................................................................................................5 GENERAL PARTS.........................................................................................
IMPORTANT INSTRUCTIONS SAFETY INSTRUCTIONS De bliksemschicht met pijl in de driehoek is een waarschuwingsteken dat u attent maakt op “gevaarlijke spanning” binnenin het product. VOORZICHTIG: OM HET RISICO OP EEN ELEKTRISCHE SCHOK TE VERMINDEREN DIENT U HET DEKSEL (OF DE ACHTERKANT) NIET TE VERWIJDEREN. ER BEVINDEN ZICH BINNENIN GEEN DOOR DE GEBUIKER TE REPAREREN ONDERDELEN. LAAT DE SERVICE OVER AAN BEVOEGD PERSONEEL.
● Do not operate this product under the following conditions. - When the power-supply cord or plug is damaged. - If liquid has been spilled into or objects have fallen into the product. - If the product has been exposed to rain or water. - If the product does not operate when used according to the operating instructions. - If the product has been dropped or damaged in any way. ● Do not attempt to service the product; take it to the electronics repair shop of your choice for any servicing or repair.
DISPOSAL OF OLD ELECTRICAL APPLIANCES The European directive 2002/96/EC on Waste Electrical and Electronic Equipment (WEEE), requires that old household electrical appliances must not be disposed of in the normal unsorted municipal waste stream. Old appliances must be collected separately in order to optimize the recovery and recycling of the materials they contain, and reduce the impact on human health and the environment.
FEATURES 32" TFT DISPLAY This player has a built-in 32” TFT display window to provide clear vision and low radiation.
GENERAL PARTS MAIN UNIT Front View 1. LED display screen 2. Remote control sensor 3. Power indicator- In standby mode the indicator light will display red color; when switching on the unit the indicator light will display blue color. 4. Stand holder 5. VOL +/- button- To increase/decrease the volume level or move left/right. 6. CH +/- button- To select next/previous channel or move up/down. 7. MENU button- To enter menu setting page. 8. SOURCE button- To select the input source. 9.
GENERAL PARTS Back View 1. Power input 2. HDMI1/HDMI2/HDMI3 input terminals 3. VGA input terminal 4. SCART input terminal 5. EARPHONE output terminal 6. USB input terminal- For multimedia files playback. 7. CVBS and AUDIO R/L input terminals 8. YPbPr input terminal 9. PC AUDIO input terminal 10. RF (Antenna) input terminal 11.
REMOTE CONTROL 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14. 15. 16. 17. 18. 19. 20. 21. 22. 23. 24. 25. POWER: To set the unit in standby mode; press it again to switch it on. AUTO: To adjust the screen automatically (PC/VGA). RED button GREEN button BLUE button YELLOW button ASPECT: Press this button repeatedly to select desired aspect ratio of screen. TEXT: To display the TELETEXT. FAV: To display the favorite channel list. HOLD: To hold the TELETEXT.
REMOTE CONTROL 26. 27. 28. 29. 30. 31. 32. 33. 34. 35. 36. 37. 38. ▲/▼/◄/►: Navigation buttons SLEEP: To set the sleep time as desired. EXIT: To exit menu page. MUTE: To mute the sound. VOL +/-: To turn up/down the volume. CH+/-: To play the next/previous channel. DISPLAY: To display information of current program. NUMBERIC BUTTONS (0-9): To input the number information, such as channel number and so on. -/--: To switch the digit when selecting desired channel.
REMOTE CONTROL PREPARATION BATTERY INSTALLATION Install the batteries as the following pictures. Be sure + and – terminals are positioned as indicated in the battery compartment (Fig1). SERVICE LIFE OF BATTERIES - The batteries normally last for one year although this depends on how often the remote control is used. - If the remote control fails to work even when it is operated near the player, replace the batteries. - Use two size AAA dry batteries.
BASIC CONNECTION ● Ensure all the cables are disconnected from the main unit before connecting to AC power source. ● Read through the instructions before connecting other equipments. CONNECTING TO AC POWER SOURCE Main unit To power outlet CONNECT EXTERNAL ANTENNA TO UNIT Install external antenna into antenna jack for best picture.
COMPOSITE AV (CVBS) CONNECTION AV cable For basic connection, use the composite Audio L/R (white/red) and CVBS (yellow) cable to connect the unit with other devices.
HDMI CONNECTION Use HDMI cable to connect the unit with other devices to receive high-definition multimedia signal. NOTE: Up to 3 roads HDMI can be connected for this TV.
PC/VGA CONNECTION Audio cable VGA cable Back of PC Use VGA cable and Audio cable to connect the unit with TV or PC, and use this product as a monitor.
MAKE SURE ALL THE EQUIPMENTS AND POWER CORD ARE CONNECTED PROPERLY AND THE UNIT IS SET IN CORRECT MODE BEFORE KINDS OF OPERATIONS. BASIC OPERATIONS - Press POWER button on the unit or remote control to power ON the unit (indicator will glow blue); press it again to power OFF (standby mode) the unit (indicator will glow red). - Press SOURCE button on the unit or remote control to set the unit in TV mode. SELECT DESIRED PROGRAM 1. Press CH+ button to play next channel. 2.
SLEEP TIME SETTING - Press SLEEP button on remote control repeatedly to select SLEEP TIME directly. Available options: Off, 10min, 20min, 30min, 60min, 90min, 120min, 180min, 240min. VIDEO SIZE SETTING - Press ASPECT button on remote control repeatedly to select VIDEO SIZE directly. Available options: Auto, 4:3, 16:9, Zoom1, Zoom2. NOTE: The available video size may be different for different input source. SOUND SETTING - Press NICAM button on remote control repeatedly to select desired soundtrack.
MEDIA PLAYBACK - Insert a USB memory device into USB slot. - Press SOURCE button on the unit or remote control to switch this unit to Media mode. - Press EXIT button on remote control to return to previous menu page. 1. PHOTO - Press LEFT or RIGHT navigation button to select PHOTO item. - Press OK button to enter it and press LEFT or RIGHT navigation button to select desired disk. - Press OK button to enter it and press navigation buttons to select desired folder.
- Press RED button to enter a dialog box, and press LEFT or RIGHT navigation button to decide whether delete it or not. - Press OK button to play highlighted file. During PHOTO normal playing: - Press EXIT button on remote control to hide the tool bar. - Press DISPLAY button on remote control to display the tool bar. - Press LEFT/RIGHT navigation buttons to select desired option and press OK button to confirm it. - Press button to pause/start playing. - Press / button to play previous/next file.
- Press RED button to enter a dialog box, and press LEFT or RIGHT navigation button to decide whether delete it or not. - Press OK button to play highlighted file. During MUSIC normal playing: - Press LEFT or RIGHT navigation button to select desired option in the tool bar, and press OK button to confirm selection. - Press button to pause/start playing. - Press / button to play fast backward / fast forward. / button to play previous/next file. - Press - Press █ button to stop playing. 3.
- Press RED button to enter a dialog box, and press LEFT or RIGHT navigation button to decide whether delete it or not. - Press OK button to play highlighted file. During MOVIE normal playing: - Press DISPLAY button on remote control to display the tool bar. - Press EXIT button on remote control to hide the tool bar. - Press LEFT or RIGHT navigation button to select desired option in the tool bar, and press OK button to confirm selection. - Press button to pause/start playing.
4. TEXT - Press LEFT or RIGHT navigation button to select TEXT item. - Press OK button to enter it and press LEFT or RIGHT navigation button to select desired disk. - Press OK button to enter it and press navigation buttons to select desired folder. - Press OK button to enter it and press navigation buttons to select desired Text file. - Press RED button to enter a dialog box, and press LEFT or RIGHT navigation button to decide whether delete it or not. - Press OK button to play highlighted file.
MAIN MENU ● The unit contains different setting menus. Once the initial programming is entered, it will be remained in the memory until change, and the unit can always be operated under the same conditions. ● The settings will be remained in the memory until the settings are changed ever after setting the player to standby mode. Common procedure for initial settings - Press MENU button on remote control to display the main menu. - Press LEFT/RIGHT navigation button to select submenus.
1.2 ATV Manual Tuning - Press UP or DOWN navigation button to select this item, and press OK button to enter it. - Press UP or DOWN navigation button to select the second option. - Press LEFT or RIGHT navigation button to adjust it. 1.3 Programme Edit - Press UP or DOWN navigation button to select this item, and press OK button to enter it. - Press RED button to delete highlighted channel. - Press GREEN button to enter Rename mode.
2.1 Picture Mode Available options: User, Dynamic, Standard, Mild. NOTE: The value of Contrast, Brightness, Colour, Tint and Sharpness is adjustable only when Picture Mode is User. 2.2 Contrast The value of contrast can be adjusted from 0-100. 2.3 Brightness The value of brightness can be adjusted from 0-100. 2.4 Color The value of color saturation can be adjusted from 0-100. 2.5 Tint The value of tint can be adjusted from 0-100. NOTE: This item is available only in NTSC system. 2.
3.1 Sound Mode Available options: Standard, Music, Movie, Sports, User. NOTE: The value of Treble and Brass is adjustable only when Sound Mode is User. 3.2 Treble This item is used to adjust the level of higher-pitched sounds from 0-100. 3.3 Bass This item is used to adjust the level of lower-pitched sounds from 0-100. 3.4 Balance This item is used to adjust the audio output between left and right speakers from -50 to 50. 3.5 Auto Volume This item is used to turn on/off Auto Volume function. 4.
5. OPTION 5.1 OSD Language This item is used to select desired On Screen Display language. 5.2 TT Language This item is used to select desired TT language. 5.3 Aspect Ratio Available options: Auto, 4:3, 16:9, Zoom1, Zoom2. NOTE: Aspect Ratio may not be adjustable if no available signals are present. 5.4 Blue Screen This item is used to set the blue background ON or OFF. The screen background will turn blue at very weak or no signal condition, if BLUE SCREEN is ON. 5.
PC MODE - Power on your computer and this TV. - Connect your computer to this TV using a VGA cable. - Press SOURCE button on the unit or remote control to switch this unit to PC mode. - Press MENU button to display the main menu and press LEFT or RIGHT navigation button to select SCREEN. - Press UP or DOWN navigation button to select desired option and press OK button to enter submenu. - Press LEFT or RIGHT navigation button to adjust the value.
MAINTENANCE ● Be sure to press POWER button to set the player to the standby mode and disconnect the plug before maintaining the player. ● Wipe the player with a dry, soft cloth. ● If the surface is extremely dirty, wipe clean with a cloth which has been dipped in a weak soap-water solution and wrung out thoroughly, and then wipe again with a dry cloth. ● Never use alcohol, benzene, thinner, cleaning fluid or other chemicals. And do not use compressed air to remove dust.
STAND INSTALLATION Your TV may be packaged with the Stand and the Cabinet separated. Before enjoying this TV, please carry out the Stand Installation according to the instructions below. Step 1 Place the TV faced down on a soft cloth or cushion to prevent the panel from being damaged. Step 2 Align the Stand with TV bottom and then force the end of stand until the TV is fully seated on the stand. Step 3 Tighten the included screws with a screw driver.
SPECIFICATIONS Display Device Resolution Display Colors Contrast Ratio Aspect Ratio 32 inch LED TV 1366×768 16.7M 3000:1 16:9 Life Time 30,000 Hrs USB Multimedia Format Power Source POWER CONSUMPTION OPERATION TEMPERATURE MEASUREMENT WEIGHT Movie: AVI, MP4, TS, MPG, MKV/MOV, DAT, VOB Music: MP3, AAC Photo: JPG/JPEG, BMP, PNG Text: TXT AC 100~240V, 50/60Hz ≤60W -5℃ to 45℃ 738 (W)×181(D)×489(H)mm Approx. 5.5 Kg Specifications are subject to change without notice.
GENERAL TROUBLESHOOTING Check the following points before assuming malfunctions of this unit: Symptom No power. No picture. ● No sound. ● Distorted sound. No operations can be performed with the remote control unit. No key operation(by the main unit and/or the remote control unit is effective. Symptom(TV) No or poor picture. No sound or poor sound. Noise or other interface. Remedy Insert the power plug securely into the power outlet. Ensure that the equipment is connected properly.