DMP66/DMP660 INSTALLATION/OWNER'S MANUAL 6.
DMP66/DMP660 INSTALLATION Preparation/Installation Please read entire manual before installation. Before You Start • Disconnect negative battery terminal. Consult a qualified technician for instructions. • Use extreme caution when drilling holes to avoid damaging fuel lines, hydraulic lines or existing wiring. • If additional wiring is required, we recommend that you run all wires prior to mounting your speaker in place.
DMP66/DMP660 WARRANTY Limited One Year Warranty This warranty gives you specific legal rights. You may also have other rights which vary from state to state. Dual Electronics Corp. warrants this product to the original purchaser to be free from defects in material and workmanship for a period of one year from the date of the original purchase. What to do? 1. Before you call for service, check the troubleshooting guide in your owner’s manual.
DMP66/DMP660 SPECIFICATIONS Specifications Outside Diameter 7.05" Mounting Depth 2.24" Mounting Height .71" Cut-out Diameter 5.13" Frequency Response 45Hz-15kHz Sensitivity 88dB 1W/1M Impedance 4 ohms RMS Power 20 Watts @ 1kHz Peak Power 60 Watts @ 1kHz Design and specifications subject to change without notice. Dual Electronics Corp. Toll Free: 1-866-382-5476 www.dualav.com ©2009 Dual Electronics Corp.