Owner's Manual
Installation
Before
You Start
• Consult a qualified technician for instructions. Dual always recommends
professional installation.
• Disconnect negative battery terminal.
• Remove
trim
ring from unit (if installed).
• Remove 2 transit screws located on top of the unit (if applicable).
• Insert the removal keys. and remove the mounting sleeve from the head unit.
Note:
Most vehicles require an installation kit. wiring harness and/or antenna
adapter (all sold separately) to properly install the head unit in the vehicle.
Installation
Pt
o.:ess
1.
Carefully remove the existing head unit.
2.
Conned
wiring
harness. Consult a qualified technician
if
you are unsure.
3.
Mount the head unit using the mounting sleeve
or
ISO
brackets (depending
on
your
vehicle's dashboard).
4.
Conned
wiring
harness and antenna. Test the head unit
for
correct operation.
5.
Slide into mounting sleeve to secure.
or
mount the
ISO
brackets to the
vehicle.
6.
Snap
trim
ring into place.
Wiring
Connections
The chart below the connection for each
wire
in the
wiring
harness.
Color
Red
Yellow
Black
Blue
Grey
Grey/Black
White
White/Black
Violet
Violet/Black
Green
Green/Black
Connection
12V
Ignition /
Accessory
12V
Battery/ Memory
Ground
Power
Antenna
/
Amp
Turn-on
Right
Front (+)
Right
Front
(-)
Left Front (+)
Left Front (-)
Right
Rear(+)
Right
Rear(-)
Left
Rear
(+)
Left Rear(-)
Tip:
When a suitable ground wire is
not present in the vehicle wiring
hirness.
conned
the black ground
wire
to the vehicle chassis.
Fuse:
When replacing the fuse. make
sure
new
fuse is the correct type
and amperage. Using an incorrect
fuse could damage the radio.