Owner's Manual

Preparation
Pairing a New
Device
Pairing
Additional
Devices
Disconnectin~ a
Devace
Streaming Audio
Troubleshooting
Bluetooth® Operation*
Before using a Bluetooth device. it must be paired and
connected. Ensure that Bluetooth is activated on your
device before beginning the pairing process.
The head unit broadcasts the pairing signal constantly
when no devices are connected. Complete the pairing
sequence from your Bluetooth device. Refer to the
owner's manual for your device for more details.
The device name is "DUAL BT'
The Bluetooth passcode "1234"
Note: The head unit can be in any mode of operation
when pairing is performed.
If a device is currently connected. press and hold ~
to disconnect the current device before a new device
can be paired. Then begin the pairing sequence from
the new Bluetooth device.
Press and hold ~ for 3 seconds to disconnect a
connected device. The device will remain paired and
appear in the SEARCH menu. but not be connected.
The head unit supports A2DP wireless streaming audio
from a Bluetooth mobile device directly to your head unit.
The following functions can be used to control the music:
• Press ►► to skip to the next available audio track.
• Press ◄◄ to skip to the previous audio track.
• Press ►/ 11 to toggle between play and pause during
playback.
• • • • • • • • • • • • • • • •
* Not available on all models.
To download the complete Owner's Manual for your radio.
please visit www.dualav.com/support/manuals.php.