Owner's Manual

MGH17BT OPERATION

Press AUDIO/MENU momentarily to select between Bass,

Middle, Treble, Balance, Fader, Loudness, EQ and

Stereo/Mono

Press AUDIO/MENU until BASS appears then press VOL+ or

VOL- to adjust ( -6 minimum / +6 maximum).

Press AUDIO/MENU until MIDDLE appears then press VOL+

or VOL- to adjust ( -6 minimum / +6 maximum).

Press AUDIO/MENU until TREBLE appears then press VOL+

or VOL- to adjust ( -6 minimum / +6 maximum).

Press AUDIO/MENU until BAL appears then press VOL+ or

VOL- to adjust

(BAL LEFT 12 - BAL RIGHT 12).

BAL EVEN represents equal balance.

Press AUDIO/MENU until FADER appears then press VOL+

or VOL- to adjust (FADER FRONT 12 - FADER REAR 12).

FADER EVEN represents equal fader.

Press AUDIO/MENU until LOUD appears then press VOL+ or

VOL- to turn the Loudness feature ON or OFF.

Press EQ, then then press VOL+ or VOL- to cycle through

the following equalization curves: USER, ROCK, BEAT,

CLASSIC, JAZZ, POP or FLAT. Any manual adjustment to the

Bass or Treble settings are automatically saved as USER.

The source volume level control allows a gain adjustment

for each audio source. Set the source volume level for each

mode, depending on the relative volume of each audio

source.

To set the source volume level, press AUDIO/MENU until

SRC LEVEL appears. After one second, the current mode

will appear on the display. Press VOL+ or VOL- to adjust

the audio level of the current source (-6 minimum/+6

maximum).

Note: Only the current mode will be available for

adjustment. To adjust another mode of operation, press

MODE until the desired mode is selected, then set the

source volume level for that mode.

Audio

Bass

Middle

Treble

Balance

Fader

Loudness

Source Volume Level

General Operation

BASS TREBLE BALANCE FADER LOUD EQ

STEREO / MONO