NR 5 DAB V1_06-13 Stereo DAB+/UKW-Radio NR 5 DAB Bedienungsanleitung
Das Vorwort Diese Bedienungsanleitung hilft Ihnen beim bestimmungsgemäßen und sicheren Gebrauch Ihres Radios, im folgenden Anlage oder Gerät genannt. Die Zielgruppe dieser Bedienungsanleitung Die Bedienungsanleitung richtet sich an jede Person, die das Gerät aufstellt, bedient, reinigt oder entsorgt. Namen der erwähnten Firmen, Institutionen oder Marken sind Warenzeichen oder eingetragene Warenzeichen der jeweiligen Inhaber.
Inhaltsverzeichnis Sicherheit und Aufstellen des Geräts ......................... 5 Sicherheit ........................................................................ 5 Umgang mit Batterien ..................................................... 8 Die Beschreibung des Geräts .................................... 10 Der Lieferumfang .......................................................... 10 Die besonderen Eigenschaften des Geräts ..................10 Bedienelemente...................
Das Vorwort Wie Sie Uhrzeit und Weckzeit einstellen...................29 Wie Sie die Uhrzeit manuell einstellen ..........................29 Wie Sie die Weckzeit einstellen ....................................29 Wecker nach Alarm ausschalten...................................31 Wecker ein-/ausschalten ...............................................31 Wie Sie die SLEEP-Funktion benutzen.........................31 Wie Sie das Gerät reinigen ........................................
Sicherheit und Aufstellen des Geräts Sicherheit und Aufstellen des Geräts Lesen Sie bitte alle Sicherheitshinweise sorgfältig durch und bewahren Sie diese für spätere Fragen auf. Befolgen Sie immer alle Warnungen und Hinweise in dieser Bedienungsanleitung und auf der Rückseite des Geräts. Sicherheit Vorsicht im Umgang mit dem Netzadapter! Das Gerät darf nur an eine Netzspannung von 100 240 V~, 50/60 Hz angeschlossen werden. Versuchen Sie niemals, das Gerät mit einer anderen Spannung zu betreiben.
Sicherheit und Aufstellen des Geräts Öffnen Sie das Gerät auf keinen Fall – dies darf nur der Fachmann. Fremdkörper, z.B. Nadeln, Münzen, etc., dürfen nicht in das Innere des Gerätes fallen. Es dürfen keine offenen Brandquellen, wie z.B. brennende Kerzen auf das Gerät gestellt werden. Lassen Sie Kinder niemals unbeaufsichtigt dieses Gerät benutzen. Überlassen Sie Wartungsarbeiten stets qualifiziertem Fachpersonal. Andernfalls gefährden Sie sich und andere.
Sicherheit und Aufstellen des Geräts sen könnten. Verwenden Sie einen Schutz zwischen Ihren Möbeln und dem Gerät. Der Standort darf nicht in Räumen mit hoher Luftfeuchtigkeit, z.B. Küche oder Sauna, gewählt werden, da Niederschläge von Kondenswasser zur Beschädigung des Gerätes führen können. Das Gerät ist für die Verwendung in trockener Umgebung und in gemäßigtem Klima vorgesehen und darf nicht Tropf- oder Spritzwasser ausgesetzt werden.
Sicherheit und Aufstellen des Geräts Bestimmungsgemäßer Gebrauch Dieses Gerät ist nur zum Gebrauch in geschlossenen Räumen zum Radio hören bestimmt. Eine andere oder darüber hinausgehende Benutzung gilt als nicht bestimmungsgemäß. Umgang mit Batterien Das Gerät ist für den privaten Gebrauch konzipiert und nicht für gewerbliche Zwecke geeignet. 8 Achten Sie darauf, dass Batterien nicht in die Hände von Kindern gelangen. Kinder könnten Batterien in den Mund nehmen und verschlucken.
Sicherheit und Aufstellen des Geräts Vorsicht! Batterien keinen extremen Bedingungen aussetzen. Nicht auf Heizkörpern ablegen, nicht direkter Sonnenstrahlung aussetzen! Ausgelaufene oder beschädigte Batterien können bei Berührung mit der Haut Verätzungen verursachen. Benutzen Sie in diesem Fall geeignete Schutzhandschuhe. Reinigen Sie das Batteriefach mit einem trockenen Tuch. Wichtiger Hinweis zur Entsorgung: Batterien können Giftstoffe enthalten, die die Gesundheit und die Umwelt schädigen.
Die Beschreibung des Geräts Die Beschreibung des Geräts Der Lieferumfang Bitte stellen Sie sicher, dass alle nachfolgend aufgeführten Zubehörteile vorhanden sind: DAB+Radio-Gerät, Fernbedienung (Batterien im Lieferumfang) Netzteil, diese Bedienungsanleitung. Die besonderen Eigenschaften des Geräts Mit dem Digital-Radio steht ein neues Format zur Verfügung, durch welches man kristallklaren Sound ohne Rauschen und Knistern hören kann.
Bedienelemente Bedienelemente 12 1 33 2 3 9 4 5 11 17 12 6 7 10 8 14 16 13 15 11
Bedienelemente 1 Mode Wahlschalter Digitalradio DAB, UKW, Bluetooth, AUX 2 Info Informationen einblenden 3 Scan 4 Menu 5 Preset DAB, UKW: automatische Sendersuche Menü öffnen, schließen; Im Menü zurück Programmierte Sender, PRESETs aufrufen (Taste drücken) bzw.
Fernbedienung Fernbedienung 18 19 32 31 29 27 28 30 MODE MENU INFO MUTE SCAN 20 21 22 23 26 25 21 MUTE Stummschaltung 22 I Titelwahl, Suchlauf Bluetooth 23 II PLAY/PAUSE Bluetooth 24 SNOOZE Schlummer-Funktion SNOOZE 25 SLEEP Einschlaffunktion SLEEP 26 PRESETs aufrufen (Taste drücken) bzw. speichern (Taste drücken und halten) 1 ...
Wie Sie das Gerät zum Betrieb vorbereiten Wie Sie das Gerät zum Betrieb vorbereiten Wie Sie den Antennenempfang verbessern Die Anzahl und Qualität der zu empfangenden Sender hängt von den Empfangsverhältnissen am Aufstellort ab. Mit der DAB-/UKW-Teleskopantenne 17 kann ein ausgezeichneter Empfang erzielt werden. Diese Antenne muss in voller Länge auf den günstigsten Empfang ausgerichtet werden.
Wie Sie das Gerät zum Betrieb vorbereiten Antritt einer längeren Reise, ziehen Sie den Netzstecker. Die beim Betrieb entstehende Wärme muss durch ausreichende Luftzirkulation abgeführt werden. Deshalb darf das Gerät nicht abgedeckt oder in einem geschlossenen Schrank untergebracht werden. Sorgen Sie für einen Freiraum von mindestens 10 cm um das Gerät. Hinweis: Nach einem Stromausfall wird möglicherweise nicht die korrekte Uhrzeit angezeigt.
Wie Sie das Gerät zum Betrieb vorbereiten Wenn Sie einen Kopfhörer (nicht im Lieferumfang) anschließen, sind die Lautsprecher stumm geschaltet. Verwenden Sie nur Kopfhörer mit 3,5 Millimeter Klinkenstecker. Stecken Sie den Stecker des Kopfhörers in die Kopfhörer-Buchse 13 des Geräts. Die Klangwiedergabe erfolgt jetzt ausschließlich über den Kopfhörer in Stereo. Wenn Sie wieder über die Lautsprecher hören möchten, ziehen Sie den Stecker des Kopfhörers aus der Kopfhörer-Buchse des Geräts.
Wie Sie das Gerät zum Betrieb vorbereiten gen. Werfen Sie die Batterien niemals in den normalen Hausmüll. Hinweis: Wird die Fernbedienung längere Zeit nicht benutzt, sollte die Batterie herausgenommen werden. Andernfalls kann die Fernbedienung durch Auslaufen der Batterie beschädigt werden. Nimmt die Reichweite der Fernbedienung ab, sollten die Batterien gegen neue ausgewechselt werden. Was ist Bluetooth Bluetooth ist eine Funk-Verbindung über kurze Distanzen.
Wie Sie allgemeine Geräte-Funktionen bedienen Wie Sie allgemeine GeräteFunktionen bedienen Wie Sie das Gerät einschalten Ziehen Sie vor der Verwendung des Gerätes die Teleskopantenne 17 auf volle Länge aus. Drücken Sie On/Stdby 9 bzw. die Taste 18, das Gerät wird eingeschaltet. In STANDBY ist das Gerät ausgeschaltet aber bei Verwendung des Steckernetzteils mit dem Stromnetz verbunden. Hinweis: Nach dem erstmaligen Einschalten ist das Gerät im DAB-Radiobetrieb.
Wie Sie allgemeine Geräte-Funktionen bedienen Eco-Standby-Modus Das Gerät schaltet sich nach einiger Zeit ohne Wiedergabe bzw. ohne Signal automatisch in Standby. 18, um das Gerät wieder Drücken Sie die Taste einzuschalten. Bzw. On/Stdby 9. Allgemeine Bedienung Sie können die Einstellungen sowohl mit den Tasten am Gerät wie auch mit der Fernbedienung vornehmen. Identische Beschriftung auf Fernbedienung und Gerät bedeutet identische Funktionen.
Bluetooth-Modus Bluetooth-Modus Gerät per Bluetooth verbinden Drücken Sie die Taste MODE 29 wiederholt, um zu Bluetooth zu schalten. Es blinkt ein Symbol und im Display. Das Gerät befindet sich im Pairing-Modus. D.h., das Gerät wartet auf ein Pairing mit einem neuen Bluetooth-Gerät bzw. startet die Verbindungsaufnahme mit einem bekannten, bereits gepairten BluetoothGerät.
Bluetooth-Modus Die DAB-Funktion Was ist DAB+ DAB+ ist ein neues digitales Format, durch welches Sie kristallklaren Sound ohne Rauschen hören können. Anders als bei herkömmlichen Analogradiosendern werden bei DAB mehrere Sender auf ein und derselben Frequenz ausgestrahlt. Dies nennt man Ensemble oder Multiplexe. Ein Ensemble setzt sich aus der Radiostation sowie mehreren Servicekomponenten oder Datendiensten zusammen, welche individuell von den Radiostationen gesendet werden. Infos z.B unter www.
Wie Sie das Gerät im DAB-Modus bedienen Wie Sie das Gerät im DABModus bedienen Wie Sie einen Suchlauf bei DAB durchführen Der automatische Suchlauf „Vollständiger Suchlauf“ scannt alle DAB – Kanäle und findet somit alle Sender, die im Empfangsgebiet ausgestrahlt werden. Für den Empfang von Digitalradiostationen (DABBetrieb) sollte die Antenne 17 unbedingt in der vollen Länge vertikal positioniert werden. Drücken Sie die Taste SCAN 28.
Wie Sie das Gerät im DAB-Modus bedienen Manuelle Senderwahl / Tuning bei DAB Drücken Sie die Taste MENU 30. Wählen Sie mit den Pfeiltasten 32 < Manuell Einstellen >. Bestätigen Sie durch Drücken von OK 19. Die manuelle Senderwahl ist aktiv. Drücken Sie die Pfeiltasten 32, um durch die Labels 5A bis 13 F und deren Frequenzen zu schalten. Wird ein Ensemble auf einem der DAB-Kanäle gefunden, erscheint der Name im Display.
Wie Sie das Gerät im DAB-Modus bedienen Wie Sie die Datenkompression DRC einstellen Die Kompressionsrate gleicht Dynamikschwankungen und damit einhergehende Lautstärkevariationen aus. Drücken Sie die Taste MENU 30 und wählen Sie Wählen Sie mit den Pfeiltasten 32 < DRC >. Bestätigen Sie durch Drücken von OK 19. durch verschiedene Informationen, wie z.B. Programmtyp, Multiplexname, Frequenz, Signalfehlerrate, Datenbitrate, Programmformat, Datum, DLS, Zeit Interpret. Siehe S. 28.
Wie Sie das Gerät im UKW-Modus bedienen Wie Sie das Gerät im UKWModus bedienen Manuelle Senderwahl Um zu UKW/FM zu schalten, MODE 29 ggf. wiederholt drücken bis FM Modus im Display erscheint. Automatische Senderwahl Wie Sie einen UKW/FM-Sender einstellen Danach erscheint die Frequenz und „Radio Text“, wenn ein Sender empfangen wird. Wird ein RDS-Signal empfangen, erscheint der Sendername und ggf. der Radiotext. Bei Empfang eines RDSSignals wird die Uhrzeit automatisch eingestellt.
Wie Sie das Gerät im UKW-Modus bedienen Wie Sie UKW-Sender speichern Der Programm-Speicher kann bis zu 10 Stationen im FM-Bereich (UKW) speichern. Hinweis: Die gespeicherten Sender bleiben auch bei Stromausfall erhalten. Den gewünschten Sender einstellen. PRESET-Taste 5 lang drücken. „Progr. Speichern“ erscheint. Mit Drehen von Select Scroll 10 Programmplatz 1 – 10 wählen. Mit Select Scroll 10 bestätigen. Alternativ: eine der PRESET-Tasten 1 ... 10 drücken und gedrückt halten.
Wie Sie System-Einstellungen vornehmen Wie Sie System-Einstellungen vornehmen Wie Sie die Displaybeleuchtung einstellen Sie können die Displayhelligkeit sowohl bei Betrieb als auch für Standby einstellen. Drücken Sie die Taste MENU 30 und wählen Sie < Beleuchtung > (Select Scroll drehen und drücken bzw. Pfeiltasten und OK). Stellen Sie bei < An-Einstellung > die Betriebshelligkeit LOW oder HOCH mit den Pfeiltasten 32 ein. Bestätigen Sie durch Drücken von OK 19.
Wie Sie System-Einstellungen vornehmen Wie Sie die Displayanzeigen aufrufen Durch Drücken der Taste INFO 20 können Sie z.B. folgende Informationen einblenden: DAB-Betrieb FM (UKW) - Betrieb DLS: durchlaufender Text mit zusätzlichen Informationen, die die Sender u. U. bereitstellen RT Radiotext: durchlaufender Text mit zusätzlichen Informationen, die die Sender u. U.
Wie Sie Uhrzeit und Weckzeit einstellen Wie Sie Uhrzeit und Weckzeit einstellen Hinweis: Die Weckfunktion können Sie erst bedienen, wenn die korrekte Uhrzeit eingestellt worden ist. Die Uhrzeit wird über das DAB-Signal automatisch eingestellt. Schalten Sie mit MODE (1, 29) zum DAB-Betrieb. Stellen Sie eine DAB+ Radiostation ein und warten Sie eine kurze Zeit. Falls Sie kein Signal empfangen, wechseln Sie die Station bzw. überprüfen Sie die Signalstärke.
Wie Sie Uhrzeit und Weckzeit einstellen Schalten Sie die Weckfunktion ein, indem Sie mit Select Scroll 10 zu > Wecker ein drehen und mit Drücken von Select Scroll 10 bestätigen. Stellen Sie wie oben beschrieben die Weckzeit Zt. Ein ein. (Stunde, Minute). Dazu Select Scroll 10 drehen und drücken. (Bzw. Pfeiltasten und OK). Stellen Sie die Alarmdauer (Dauer) zwischen 15 und 90 Minuten (in 15 Minuten-Schritten) ein. Bestätigen Sie durch Drücken von Select Scroll 10.
Wie Sie Uhrzeit und Weckzeit einstellen Wecker nach Alarm ausschalten Drücken Sie die Taste 18 oder On/Stdby 9, um den Wecker ganz auszuschalten. Drücken Sie SNOOZE 24 oder Select Scroll 10, um die Schlummer-Funktion einzuschalten. Ggf. wiederholt drücken zur Einstellung der Snooze-Zeit. (5, 10, 15, 30 Minuten). Hinweis: Die Weckfunktion schaltet das Gerät am nächsten Tag zur eingestellten Weckzeit wieder ein. Im Display ist weiterhin das Wecksymbol eingeblendet.
Wie Sie das Gerät reinigen Wie Sie das Gerät reinigen Stromschlag! Um die Gefahr eines elektrischen Schlags zu vermeiden, dürfen Sie das Gerät nicht mit einem nassen Tuch oder unter fließendem Wasser reinigen. Vor dem Reinigen Netzstecker ziehen. ACHTUNG! Sie dürfen keine Scheuerschwämme, Scheuerpulver und Lösungsmittel wie Alkohol oder Benzin verwenden. Reinigen Sie das Gehäuse mit einem weichen, mit Wasser angefeuchteten Tuch.
Wie Sie Fehler beseitigen Symptom Mögliche Ursache/Abhilfe Es ist ein Störrauschen zu hören. In der Nähe des Geräts sendet ein Mobiltelefon oder ein anderes Gerät störende Radiowellen aus. Entfernen Sie das Mobiltelefon oder das Gerät aus der Umgebung des Geräts. Es treten andere Bedienungsstörungen, laute Geräusche oder eine gestörte Display-Anzeige auf. Das Display schaltet sich nicht ein. Probleme mit dem Radio Symptom Mögliche Ursache/Abhilfe Es wird kein Radiosender empfangen.
Wie Sie Fehler beseitigen Probleme mit Bluetooth Probleme mit der Fernbedienung Symptom Mögliche Ursache/Abhilfe Symptom Kein Ton Vergewissern Sie sich, dass Ihr BluetoothGerät gepairt und verbunden ist. Überprüfen Sie, ob Ihr Gerät für das Streamen von Audio über Bluetooth eingerichtet ist. Drücken Sie I. Regeln Sie die Lautstärke des BluetoothGeräts und des angeschlossenen AudioGerätes. Vergewissern Sie sich, dass Sie den richtigen Eingang "Bluetooth" gewählt haben.
Technische Daten Technische Daten Abmessungen Gerät (Breite x Höhe x Tiefe) 320 mm x 176 mm x 175 mm Gewicht: ca.
Wie Sie den Hersteller erreichen Wie Sie den Hersteller erreichen Wie Sie das Gerät entsorgen DGC GmbH Graf-Zeppelin-Str. 7 Altgeräte sind kein wertloser Abfall. Durch umweltgerechte Entsorgung können wertvolle Rohstoffe wieder gewonnen werden. Erkundigen Sie sich in Ihrer Stadtoder Gemeindeverwaltung nach Möglichkeiten einer umwelt- und sachgerechten Entsorgung des Gerätes. D-86899 Landsberg www.dual.