Portable GPS & Battery Cradle for iPod touch INSTALLATION/ OWNER’S MANUAL
INSTALLATION Preparation The Portable GPS & Battery Cradle provides both GPS location data and backup battery power to any 1st, 2nd, 3rd or 4th generation Pod touch®. Use the included Car Windshield Mount to secure the iPod and GPS Cradle in a vehicle for easy access while on the road. Note: The GPS Cradle is only designed to fit an iPod touch. Inserting any other device, such as iPhone® can cause damage to both the unit and the device.
INSTALLATION Installation Installing Car Windshield Mount • For best hold, first clean the windshield glass in desired mounting location. • Raise lev er o n M o unt , at t ach t o M o unt t o wind o w in desired location and depress lever to secure. Attaching iPod touch • Slid e iPo d t o uch int o Crad le as illust rat ed in Figure 2 (below). Please be sure to use the spacer pad and/or insert depending on the model of touch you are using (see page 4).
USAGE Installation of Spacers IMPORTANT: There is a spacer pad and a special insert included with your GPS Cradle. These are provided for use with 2nd, 3rd and 4th generation models of the iPod touch. They ensure that the iPod is held securely in the GPS Cradle. You may damage your iPod if you use the iPod in the Cradle without the spacer pad (and the insert with the 4th generation touch.
INSTALLATION Cradle Controls Battery Indicator Press Battery Indicator button, and the four LED lights above will illuminate to indicate current charge. Power Switch Move Power switch to GPS to power GPS function. When not using GPS, move Power switch to Battery to charge iPod touch or to Off to save battery. Battery Indicator Power Volume Volume controls on Cradle allow easy volume adjustment. Headphone Jack To listen with headphones, plug headphones into headphone jack at base of unit.
INSTALLATION Holder Wiring 12V Power Adaptor Use included 12V power adaptor to connect Holder to vehicle's power source to power GPS and charge iPod. Audio Out Use Audio Out port to connect Holder to vehicle stereo system with 3.5 mm mini stereo audio cable. Removing iPod To remove iPod and Cradle from Holder, pull back on tab at top of Holder, and iPod and Cradle will slide out easily. Note: The GPS will operate even when iPod and Cradle are not positioned in Holder.
USAGE Tips for Best Performance How to Remove the iPod from the Cradle The correct way to remove the iPod from the GPS Cradle is to grasp the iPod at the top with one hand, and hold the GPS Cradle firmly with the other. Pull gently on the iPod to remove it from the Cradle. Warning: Do not apply pressure to the iPod screen when removing it from the Cradle. This can damage your iPod.
USAGE Tips for Best Performance What apps work with the GPS Cradle? Most apps will work with the GPS Cradle: navigation apps, golfing apps, hiking apps, geocaching apps, social networking apps, etc. Just double-check that the app you are interested in is available for the iPod touch, and whether the app requires a full time network connection in order to work.
SPECIFICATIONS General Cradle Dimensions (WxHxD) : 2.5” x 5.1” x 0.8” Holder Dimensions (WxHxD) : 2.8” x 5.8” x 1.0” Voltage Cradle input voltage: 5V DC. Note: Please use only the included USB cable for connecting to a computer. Holder input voltage : 5V DC Note: Please use only the included cigarette jack power adapter for in-car use.
SPECIFICATIONS Environmental Requirements With iPod touch Operating temperature: 32° to 95° F (0° to 35° C) Nonoperating temperature: -4° to 113° F (-20° to 45° C) Relative humidity: 5% to 95% noncondensing Without iPod touch Operating temperature: 14° to 140° F (-10° to 60° C) Nonoperating temperature: -4° to 176° F (-20° to 80° C) Relative humidity: 5% to 95% noncondensing Design and specifications are subject to change without notice.
Limited One-Year Warranty also have other rights which vary from state to state. Dual Electronics Corp. warrants this product to the original purchaser to be free from defects in material and workmanship for a period of one year from the date of the original purchase. Dual Electronics Corp.
Limit ed O ne-Y ear Warrant y (Cont’d) What to do? 1. Before you call for service, check the troubleshooting guide in your owner’s manual. A slight adjustment of any custom controls may save you a service call. 2. If you require service during the warranty period, you must carefully pack the product (preferably in the original package) and ship it by prepaid transportation with a copy of the original receipt from the retailer to an authorized service center. 3.
FCC Compliance This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. approved by the party responsible for compliance could void the user’s authority to operate the equipment under FCC rules.
