XML8110 INSTALLATION/OWNER1S MANUAL In-Dash AM/FM/Bluetooth® Ready Docking Station IDl Madefor @J iPod oBluetooth® READY Dual
. . XML8110 INSTALLATION Preparation Please read entire manual before installation. Before You Start • Disconnect negative battery terminal. Consult a qualified technician for instructions. • Avoid installing the unit where it would be subject to high temperatures. such as from direct sunlight. or where it would be subject to dust. dirt or excessive vibration. Getting Started • Remove trim ring from unit. • Insert the supplied keys into the slots as shown. and slide the unit out of the mounting sleeve.
XML8110 INSTALLATION . . Wiring Diagram BLACK 8-pin Female Mini-DIN B'TIo46O Connection
g' XML811 0 OPERATION Control Locations - Receiver (Closed) G) Volume G) Power (1) Tune / Track Down G) Mode @ @ @ Preset4 ® Audio / Menu © End Call / Mute G) @ @ @ (j) (!) 4 Talk Preset 1 Preset 2 G) Preset 3 Preset 6 Preset 5 Display Tune / Track Up Band
XML8110 OPERATION . .
E XML8110 OPERATION Control Locations - Remote CD CD CD CD ® CD 6 Power (C»)/Select @ @ Volume Up @ Key 0 / Display Audio / Menu ® Talk Mode Tune / Track Up @ Volume Down ® ® ® ® ® (j) (i) Sea n / PS / Key # CD Preset 3 / Intro Preset 2 / Random @ Preset 6 / Folder Up @ Preset 5 / Folder Down Key 9 Mute / End Call KeyS Key 7 Preset 4 / Play / Pause Preset 1 / Repeat Band / ESC / Key * Tune / Track Down
XML81100PERATION -_._._~.~~ _ ~ ~_ ~._ _ ~_ .._. [II ----------_. General Operation Power OnlOff Mode Press the red power button or any other button to turn the unit on. Press and hold the red power button to turn the unit off. Press MODE to select between AM/FM. Auxiliary input. Bluetooth and operation of iPod modes. Modes of operation are indicated in the display.
. .XML811 0 OPERATION General Operation Setup Menu Menu Exit Press and hold AUDIO/MENU for more than 3 seconds to access the setup menu. then press AUDIO/MENU to cycle through menu options. When desired option appears in the display. rotate the volume knob left/right to adjust or activate the desired function. Press BAND to exit any menu or submenu.
XML8110 OPERATION 1m" General Operation Audio Press AUDIO/MENU momentarily to select between Bass. Treble. Balance. Fader. EO. Subwoofer* and Source Volume Level. C BASS ~ TREBLE ~ BALANCE ~ FADER ~ EQ ~ SUBWOOFER' ~ SOURCE LEVEL - , Bass Press AUDIO/MENU until Bass appears. then rotate the volume knob left/right to adjust (-6 minimum / +6 maximum). Treble Press AUDIO/MENU until Treble appears. then rotate the volume knob left/right to adjust ( -6 minimum / +6 maximum).
. . XML8110 OPERATION AM/FM Tuner Operation Seek Tuning Manual Tuning Band 10 Press TUNE ........ or TUNE ~~ for more than one second to seek the next strong station. Press TUNE ........ or TUNE ~~ momentariLy to move radio frequency up or down one step at a time. Press and hoLd to advance quickLy. Press BAND to seLect between FM1. FM2. FM3. AM1 and I AM2 bands. Up to six presets can be saved for each band. Storing and Recalling Station Presets Up to 18 FM stations and 12 AM stations can be stored.
XML8110 OPERATION . . Dock for iPod - Operation To open the XML811 0 and use the dock. pull outward from the top of the front panel. The front panel will rotate open. Continue rotating the front panel downward. The front lIanel stops when it reaches the fully open position.
. . XML811 0 OPERATION Dock for iPod - Operation For the 1st generation. 2nd generation and 4th generation iPod nano devices. the left side dock support can be replaced with a larger rubber support. for the best fit. Some iPod devices have a thinner design. and may require changing the rear rubber support at the back of the dock for the best fit. To change the rear rubber support. pull upward on support to remove it. Then replace the support with the thicker rubber support that is included in the box.
XML8110 OPERATION . . Operation of iPod Using the In-Dash Dock for iPod Control of iPod Song Select Pause Volume Insert the iPod device into the XML811 D's Docking Station following the instructions on pages 11 and 12. The iPod device can be controlled directly from the iPod device controls. or controlled using the inside panel buttons shown below: Press ~~ to skip to the beginning of the next song. Press........ to return to the lJeginntng of the current song. Pressing........
. . XML81100PERATION Bluetooth® Operation Overview Connecting a Bluetooth device requires first installing and connecting the Dual BTM60 Bluetooth interface module (sold separately). When connected to a Dual Bluetooth ready head unit. the BTMbO supports the HFP (hands-free profile). A2DP (advanced audio distribution profile) and AVRCP (audio video remote control profile). Preparation Before you can use a mobile device with this head unit. it must be paired and connected.
XML8110 OPERATION . . Bluetooth® Operation Press \,. once. "Enter Number" will be shown. then An "_" will appear on the display. Input the desired phone number using the 0-9. *. # buttons on the Making a Phone Call remote controL. Press \,. to begin dialing. t------------:.----=-----------I A phone call may also be placed from your mobile device using the keypad. phone book or speed diaL. When a call is placed from a mobile device. "DIALING" will appear on the head unit display.
. . XML8110 OPERATION Bluetooth® Operation : ~". Despription,: To view the 10 most recent calls. press \.. then press \. a second time. "Recent Calls" will be displayed. Recent Call List A list of the most recent missed. dialed. or received calls will appear. sorted by time. beginning with the most recent call. or........ Press ~~ to cycle through the list of recent calls. When the desired number appears on the display. press the center select button or \. to dial the phone number.
XML81100PERATION • Bluetooth® Operation Bluetooth Streaming Audio Operation The XML811 0 supports A2DP (advanced audio distribution profile) wireless streaming audio from your Bluetooth mobile device directly to your head unit. You can also control your music from the front panel of the head unit using AVRCP (audio video remote control profile). Notes: • To stream music to your head unit. your mobile device must support A2DP and AVRCP Bluetooth profiles.
. . XML811 0 OPERATION Limited One Year Warranty This warranty gives you specific legal rights. You may also have other rights which vary from state to state. Dual Electronics Corp. warrants this product to the original purchaser to be free from defects in material and workmanship for a period of one year from the date of the original purchase. Dual Electronics Corp. agrees. at our option. during the warranty period. to repair any defect in material or workmanship or to furnish an equal new.
XML8110 OPERATION g' Troubleshooting - General Unit will not tum on (no power) Unit has power (but no sound) Unit blows fuses Yellow wire not connected or incorrect voltage Red wire not connected or incorrect voltage Check connections for proper voltage (11-16VDC) Black wire not connected Check connection to ground Fuse blown Replace fuse Speaker wires not connected Check connections at speakers One or more speaker wires touching each other or touching chassis ground Insulate all bare speaker
• • XML8110 OPERATION Specifications FM Tuner II· ng range: 87.5MHz-107.9MHz Usable sensitivity: 8.5dBf 50dB quieting sensitivity: 10dBf Stereo separation @ 1kHz: 40dB Frequency response: 30Hz-13kHz AM Tuner Tuning range: 530kHz-1710kHz Usable sensitivity: 22uV Frequency response: 30Hz-2.2kHz General Operating voltage: 11-16 VDC.
XML8110 OPERATION . ,----' FCC Compliance This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference. and (2) this device must accept any interference received. including interference that may cause undesired operation. Warning: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
" Dual Dual Electronics Corp. Toll Free: 1-866-382-5476 www.dualav.com ©201 0 Dual Electronics Corp. All rights reserved. iPod is a trademark of Apple Inc.. registered in the U.S. and other countries. "Made for iPod" means that an electronic accessory has been designed to connect specifically to iPod and has been certified by the developer to meet Apple performance standards. Apple is not responsible for the operation of this device or its compliance with safety and regulatory standards.
Important iPod Dock Information The iPod dock includes two additional rubber support brackets that may be changed to accommodate the various sizes of iPod devices. Use the included rubber support brackets to adjust the iPod dock and securely fit your iPod into the dock. iPod Touch iPod Nano iPod Nano fj,r To adjust the depth of the iPod dock and allow for the proper fit of iPod Touch and iPod Nano devices. remove the existing rear rubber support bracket as shown in the illustration above.
