Owner`s manual

.. XML8110 INSTALLATION
Preparation
Please read entire manual before installation.
Before
You Start
• Disconnect negative battery terminal. Consult a qualified technician for instructions.
• Avoid installing the unit where it would
be subject to high temperatures. such as from
direct sunlight.
or where it would be subject to dust. dirt or excessive vibration.
Getting Started
• Remove
trim ring from unit.
• Insert the supplied keys into the
slots as shown. and slide the unit
out of the mounting sleeve.
• Install mounting sleeve into
opening. bending tabs
to secure.
• Connect wiring harness and
antenna. Consult a qualified
technician if you are unsure.
• Certain vehicles may require
an
installation kit and/or wiring
harness adapter (sold separately).
• Test for correct operation and slide
into mounting sleeve to secure.
• Snap
trim ring into place.
HEX BOLT
KEYS
MOUNTING STRAP
./
~ HEX NUT
.~ PLAIN WASHER
MOUNTING SLEEVE
lYPICAL FRONT-LOAD DIN MOUNTING METHOD
2