Use and Care Manual

The following section will explain how
to get the most out of your hand
blender. Please read this section
carefully.
• Wash the blade before using for
the first time (see cleaning and
maintenance instructions)
• Insert the blending stick (2) in the
blender body’s (1) lower part,
then turn the stick clockwise.
Ensure the metal blender stick
is securely twisted into the blender
body
• Treat the blade with respect – it
is very sharp!
• For best results, roughly chop
ingredients before blending e.g.
tomatoes, onions, garlic, leafy
herbs etc
• Place your ingredients into a bowl
that is tall enough to avoid
splashing
For maximum control and
professional blending results, two
power controls are featured on the
Dualit hand blender:
•
VVaarriiaabbllee ssppeeeedd bbuuttttoonn
Ranging from 9000rpm
to 17000rpm you can
finely set the required
speed using the speed
selection wheel (3).
The speed can be
altered while button
(4) is pressed and the blade still
rotating
•
TTuurrbboo bbuuttttoonn
– Use to achieve
maximum speed of 17000rpm.
Use short powerful pulses, ideal
for fast blending of tough
mixtures
As a general rule, the higher the
speed the faster the blending. Liquids
are better blended at lower speeds as
this reduces splashing.
SPEED CONTROL WHEEL
8
GETTING STARTED
USING YOUR HAND BLENDER
SPEED & TURBO BUTTONS
Use the variable speed control wheel
(3) for combining mixtures together
or for starting to mix ingredients,
then switch to the turbo power
setting (5) to beat well or to froth.
Rotate the speed control wheel (3)
on the top of the handle to change
the speed of the blade, as required.
The speed can be finely tuned with
each graduation on the wheel
increasing the speed from 9000rpm
to 17000rpm.
We recommend to start blending
using a slower speed and to increase
the speed setting as you blend your
mixture.
Turbo
Turbo
220306_quark file for hand blender.qxp 5/15/2006 11:34 Page 8