050107_Quark file for Blender.
050107_Quark file for Blender.
050107_Quark file for Blender.qxp 1/10/2007 10:59 Page 3 CONTENTS SAFETY PRECAUTIONS............................. 4 SAFETY SYSTEM....................................... 5 BEFORE PLUGGING IN............................. 5 ELECTRICAL REQUIREMENTS................... 5 PARTS AND CONTROLS.......................... 5 & 6 7 REMOVABLE BLADE SYSTEM................... TO ASSEMBLE YOUR BLENDER................ SAFETY INTERLOCK SYSTEM.................... 8 8 USING YOUR BLENDER............................
050107_Quark file for Blender.qxp 1/10/2007 10:59 Page 4 SAFETY PRECAUTIONS IMPORTANT SAFEGUARDS • The use of attachments, not recommended or sold by the manufacturer may cause fire, electric shock or injury. • When processing warm liquids, use heat proof gloves a. • This is an attended appliance. • Be certain the jar is firmly on the base and the lid and blade assembly is locked in place before operating appliance. • Never feed food by hand. Always use food pusher.
050107_Quark file for Blender.qxp 1/10/2007 10:59 Page 5 BLENDER PARTS SAFETY SYSTEM This appliance is provided with a safety system which disables the mechanism if the jug lid or blade assembly is not fitted even if the switch button is “ON”. Note: Do not use the jug to switch the appliance on and off. • Use this product with rated voltage A.C. outlet only. • Be sure to unplug the A.C. cord when blender is not being used.
050107_Quark file for Blender.qxp 1/10/2007 10:59 Page 6 Fig. 1 Blender Assembly Fig. 2 Safety Interlock System 1 3 2 4 Closed - Motor will operate Open - Motor will not run Fig. 3 Cord Storage Fig.
050107_Quark file for Blender.qxp Fig. 5 Locating the blade key 1/10/2007 10:59 Page 7 Fig. 6 Unlocking blade assembly Fig. 7 Removing blade from jug 1 11 12 13 Unlocking the blade assembly for cleaning: • The filler cap doubles as a key 1 to unlock the blade from jug. • To unlock the blade, remove the filler cap / key from the lid. Turn the jug 4 upside down and rest on a steady surface. • Position the key 1 in the collar 3 aligning the indicators on the collar 13 as shown in Fig 5.
050107_Quark file for Blender.qxp 1/10/2007 10:59 Page 8 TO ASSEMBLE YOUR BLENDER USING YOUR BLENDER • Do not plug in until you have assembled your blender and unplug straight after use. Fig. 1 • Plug power cord into earthed socket. Blender is now ready for use. Please Note: The Red “standby” light indicates that there is power to the Blender. This light changes to a Green light when the blades are running 9 . • Place fully assembled jug onto power base.
050107_Quark file for Blender.qxp 1/10/2007 10:59 Page 9 CORD STORAGE CLEANING • To vary the length of the power cord/cable uncoil from storage area beneath powerbase. Fig. 3 • • • • PULSE FEATURE • Ensure the blender is fully assembled and in place on motor base. Place ingredients into the jug and firmly attach the lid. • Switch blender “on”10 ,the red “standby” 9 • light will flash.
050107_Quark file for Blender.qxp 1/10/2007 10:59 Page 10 UK AFTER SALES SERVICE BLENDER TIPS • Make sure the electrical outlet is rated at the same voltage as that stated on the bottom of the power base. If your blender fails within one year from date of purchase we will repair or replace it free of charge provided: • Always use the blender on a clean, dry surface. • You have not misused, neglected or damaged it. • Cut most foods into cubes approximately 3/4” (1.8cm) to 1” (2.
050107_Quark file for Blender.
050107_Quark file for Blender.qxp 1/10/2007 10:59 Page 12 CE Compliant to 89/336/EEC (EMC directive) and73/23 & 93/68/ EEC (LV directive) D U A L I T L I M I T E D C O U N T Y O A K W AY C R A W L E Y W E S T S U S S E X RH11 7ST T E L E P H O N E : +44 (0) 1293 652 500 F A C S I M I L E : +44 (0) 1293 652 555 EMAIL: info@dualit.com WEB: www.dualit.