User manual

35
E N G L I S H
PROBLEM POSSIBLE CAUSE SOLUTION
Handset is not
registering
• Base station is not ready for
registration.
• The charging cradle is not
connected.
• There are no batteries in the
handset.
• The base station is not connected.
• Reset the base station by pressing the key on the back of
the base station and try to register again.
• Make sure the power supply is properly connected to the
charging cradle and that the power is on.
• Make sure the batteries are correctly fi tted into the handset.
Reset the base station and try to register again.
• Make sure that the power supply is properly connected to
on the base station and that the power is on.
No connection
between handset
and base station
• You are out of range of the base
station.
• The handset is not registered.
• The base station is not connected to
power.
• Move closer to the base station.
• Register the handset.
• Make sure the power supply is properly connected to
on the base station and that the power is on.
Handset on the
charging cradle does
not charge
• The cradle is not powered.
• The handset is not placed properly
in the charging cradle.
• The batteries are not inserted correctly.
• Connect the power adapter of the charging cradle to an
active power outlet.
• Place the handset correctly in the charging cradle.
• Check the position of the batteries.
Handset does not
ring
• The Skype status is set to offl ine or
do not disturb.
• The handset ringer may be off.
• The handset may be too far away
from the base station.
• Set your Skype status to online.
• Increase the ringer volume.
• Move closer to the base station.
T ROU B L E SHO O T I NG
•
For more advanced functionality descriptions you should
consult the User Manual found at www.dualphone.net
UK DUALphone Inst.guide.indd 35 13/10/06 14:44:35