User manual

11
E N G L I S H
How to install the base station
Please refer to the right fl ap of this Installation Guide for
illustrations for the installation of the base station.
a) Connect on the base station to a LAN (Local Area
Network) port on your broadband connection (modem,
router, hub, switch etc.) using the provided Ethernet cable.
b) Connect the power adapter to an active power outlet and
connect on the base station to the power adapter
(12 V, 300 mA, 3.6 VA).
c) Connect on the base station to a telephone socket
(if available), using the provided telephone cable and
optional plug.
The light indicator on the front has two functions:
• Always on confi rms that the Ethernet cable is connected.
• Blinking indicates that the Ethernet cable is not connected.
H OW T O INS TA L L T H E BA S E STAT I O N
UK DUALphone Inst.guide.indd 11 13/10/06 14:43:55