User's Manual

Special selection function: vehicle model and unit of

measurement (fig. 12)

The control unit automatically informs the instrument

panel about the vehicle model and unit of measurement to

be displayed; hold down buttons (A) and (B) and turn

ignition switch from OFF to ON to force the system and

change these parameters. The display shows vehicle

model and version in flashing mode. Press button (B) to

display in sequence all possible settings. To save the

setting chosen hold down button (A) for at least 5

seconds, until OFF is displayed, then turn the key to OFF.

Note

When this function is activated, vehicle ignition is

inhibited.

fig. 12

DUCum_1000DS####03_###e.book Page 20 Wednesday, March 12, 2003 4:33 PM