User's Manual

E
69
Remove the burnt-out bulb (10) and replace it with a new
one, do not touch the transparent quartz (fig. 59).
Parking light
Disconnect the connections (11) from terminals (fig. 60).
Remove the parking light (12) from its seat and replace it
with a new one with the same rating.
Refitting the bulbs
Once you have replaced all necessary parts, reconnect
cable connectors on bulb terminals, previously
disconnected. Reposition headlight cover in its seat, make
sure that the edges match and secure it to headlight body
by tightening the clips.
Note
It is possible to reverse the cables on bulb terminals.
10
fig. 59
11
12
fig. 60
DUCum_1000DS####03_###e.book Page 69 Wednesday, March 12, 2003 4:33 PM