User Guide

Chain lubrication

The chain fitted on your motorcycle has O-rings that

keep dirt out of and lubricant inside the sliding parts. The

seals might be irreparably damaged if the chain is

cleaned using non-specific solvents or washed using

steam or water jets. Dry the chain using compressed air

or absorbent material and apply SHELL Advance Chain or

Advance Teflon Chain on each link.

Important

Using non-specific lubricants may lead to severe

damage to chain, front and rear sprocket.

Replacing bulbs

Before replacing a burnt-out bulb, make sure that the

new one complies with voltage and wattage as specified

on page 66 - “Electric System”.

Headlamp (fig. 45 and 46)

To gain access to headlamp bulbs, slacken the lower

screw (1) holding the rim-reflector assembly to the body

and disconnect the connector (2, fig. 46) from the

headlamp. Release the clip (3, fig. 46) that secures the

bulb and remove it from the socket.

Replace the bulb.

fig. 45