Operating instructions

- B 33 -

Short Seam Automat 2211-5 Working Instructions

Beisler Automated Sewing Equipment

B.3

Operation

B.3.10 Controlling machine cycle

Fig. 25: The complete process of the sewing programs

is controlled by using the two footswitches.

Footswitch for machine operation

Footswitch for slash selvage clamp

Each sewing program offers several alternatives (modes)

for controlling the process.

The sewing programs:

• M 01 with seam 01 ("Crimping over left slash selva-

ge and sew onto left trouser component") and

• M 03 with seam 19 ("Right slash selvage for ladies'

trousers."),

are controlled by using both footswitches.

• The footswitch for the slash selvage clamp

closes

the slash selvage clamp after the slash selvage has

been inserted,

• The footswitch for machine operation

controls the

entire subsequent process of the sewing programm.

The sewing programs:

• M 01 with seam 02 ("Sewing right slash selvage to

right trousers component")

• M 02 with seam 11,12 ("Right and left side pocket"),

• M 03 with seam 20 ("Left slash selvage for ladies' trou-

sers")

are controlled exclusively by using the footswitch for ma-

chine operation

The sewing program:

• M 0 with seam 03 ("Test seam")

is also controlled by using the footswitch for machine ope-

ration

Fig. 25