Operating instructions

Controller with the OP3000 control panel
Operating Instructions 650-16 - 01.0 - 06/2014 71
7.5 Automatic mode
Program numbers 001 to 999.
1. Use 
/ to select the “Program” parameter.
2. Use 
/ to select the program number “1” or another one if
available.
 The controller switches to automatic mode and the following
information appears in the display:
Figure 40: Display in Automatic mode
The following table shows the individual symbols in the display
and the functions of the keys on the control panel.
7.5.1 Before starting sewing
Symbol Meaning
Quick programming (depending on the assignment)
• Press the upper softkey
Quick access function (softkey menu)
• Press the lower softkey
Program number
Value range: 000 to 999
• Use
/ to select the “Program” parameter.
• Use / to change the program number.
Or:
• Input the program number using the 0 - 9 keys
and confirm with “OK” as required.
If you select program 000, the controller selects
Manual mode