Operating instructions
4.6 Setting the Buttonhole Length
Caution Risk of Injury !
Turn off the switch of the sewing machine head.
Change the buttonhole length only with the sewing machine head
turned off!
–
Turn off the switch for the machine head.
–
Pull off the hand crank 1.
–
Lift lid 2 up to the stop.
–
Loosen screw 3.
–
Adjust lever 4 in the link so that the set buttonhole length results.
–
Tighten screw 3.
–
Unlock support 5 and close lid 2.
–
Attach hand crank 1.
–
Turn on the switch for the machine head.
–
Set the new buttonhole length with the "
Buttonhole Length
"
function in the "
Buttonhole Parameters
" menu.
–
Call up the "
One-time Sewing
" menu (1X) and sew a buttonhole.
–
Check if the set buttonhole length corresponds with the sewn
buttonhole.
5
3
4
1
2
1
13