Operating instructions
4.11 Needle Thread Tension
At the factory the machine head is set so that buttonholes with
flat-form tacking and raised-form buttonhole seams are sewn.
Pre-tension
The pre-tension 4 is always in effect. It serves to quiet the needle
thread. The setting value should be very small (5-10 g). The
pre-tension 4 has little influence on the seam construct.
Main tension
The main tension 5 is effective when sewing the two buttonhole seams
of the buttonhole. The main tension 5 is open during sewing of the
tacking as well as during thread trimming.
Tacking tension
The tacking tension 6 opens only during thread trimming, otherwise
this tension is closed during the complete sewing procedure.
Buttonhole seam tension
The buttonhole seam tension is mutually generated by the main
tension 5 and tacking tension 6, whereby about 1/3 of the buttonhole
seam tension should be generated by the tacking tension 6.
Setting
–
Thread the needle thread so that it does not run through the main
tension 5.
–
Call up the "
One-time Sewing (1X)
" menu and sew a buttonhole.
4
5
6
1
19