Operating instructions
5.1.4 Voiding the Feed Procedure
The feed procedure can be voided for making corrections:
–
Strike numeric key "
3
" on the control panel.
or
if the "
Knee Switch
" function is turned on, press the knee switch
again.
–
The vacuum field is turned off.
5.1.5 Continuing Sewing after Thread Breakage
When the thread monitor registers a breakage of the needle thread,
the following procedures are triggered :
–
The current buttonhole is completed without thread.
–
The thread breakage symbol appears in the display.
The sewing procedure is interrupted.
–
Select one of the symbols for continuing, which are described
under the points 1, 2 and 3, with the arrow keys "×" and "Ø".
1. Cover-seaming
2. New feed
3. Continuing sewing
Caution Risk of Injury !
Thread the needle thread only with the sewing machine head turned
off.
1. Cover-seaming
–
Strike the enter key or start key.
–
Turn off switch 1 for the sewing machine head.
The symbol for "Secured Stop" appears.
–
Rethread the needle thread.
–
Turn on the switch for the sewing machine head.
The indicator at the left appears.
–
Strike the enter key.
The sewing procedure continues.
1
2
22