Operating instructions
5.4 Re-sewing of Buttonholes
Individual buttonholes of a buttonhole facing can be re-sewn with the
"
Re-sewing of Buttonholes
" function.
The re-sewing mode can also be turned on during the sewing
procedure.
–
Strike key "
5
" in the main menu.
The symbol is shown as a negative.
The re-sewing of individual buttonholes is turned on.
–
To turn off the re-sewing of buttonholes strike key "
5
" in the main
menu.
The symbol is shown normally. The re-sewing mode is turned off.
–
After the next stacking procedure the re-sewing mode is turned off
automatically.
Sewing procedure with turned-on re-sewing mode
–
Insert material.
–
Strike the start key.
The sewing procedure is triggered.
The advancing device transports the material up to the first
buttonhole position.
–
A selection window with the following 4 options appears in the
display : 1. 2. 3. 4.
1. Sewing
–
Select the symbol at the left with the arrow keys "×" and "Ø".
–
Strike the enter key.
The buttonhole in the current position is sewn.
2. Move on
–
Select the symbol at the left with the arrow keys "×" and "Ø".
–
Select the buttonhole up to which the advancing device should
transport the material with the arrow keys "Õ" and "Ö".
–
Strike the enter key.
The material is transported to the entered buttonhole position.
3. Complete sewing of the material
–
Select the symbol at the left with the arrow keys "×" and "Ø".
–
Strike the enter key.
All buttonholes as of the current position are re-sewn.
After the sewing procedure the material is stacked.
4. Stacking
–
Select the symbol at the left with the arrow keys "×" and "Ø".
–
The following functions can be selected with the arrow keys "Õ"
and "Ö":
Remove material
Stack material
–
Strike the enter key.
26