Operating instructions

5.5 Setting of the Clearance of the Buttonholes to the Positioning Edge

The clearance of the buttonholes to the positioning edge can be set

with the setting wheel 1. The indicator 2 serves as orientation to

quickly see how the clearance is set.

The clearance of the buttonholes to the positioning edge can lie in a

range from 10 to 22 mm.

5.6 Programming the Arrangement of the Buttonholes

The buttonhole arrangement can, with the 841-27, be changed via the

controls. The following parameters can, among others, be altered :

–

Material - men’s shirt or women’s blouse

–

Regular or irregular arrangement of the buttonholes

–

Spacing of the buttonholes

–

Sewing begin

How the settings are made is described in Part 4:Programming

Instructions in the Chapter "Buttonhole Program".

5.7 Removing Material

–

Strike key "

" in the main menu.

The symbol is shown as a negative.

The stacker is opened.

–

Remove material.

–

After the next sewing procedure the stacker is automatically closed

again.