Operating instructions

6.2 Lubrication

Caution Risk of Injury !

Oil can cause skin rashes.

Avoid longer skin contact.

After contact wash yourself thoroughly.

ATTENTION !

The handling and disposal of mineral oils is subject

to legal constraints.

Deliver used oil to an authorized reception point !

Protect your environment.Take care not to spill any oil.

For lubrication use only

ESSO SP-NK 10

lubricating oil or an

equivalent oil with following specification:

–

Viscosity at 40°C: 10 mm

–

Flash point: 150°C

The oil is available from

DÜRKOPP ADLER AG

sales offices under the

following parts no.s:

–

2 liter container: 9047 000013

–

5 liter container: 9047 000014

Maintenance work

to be conducted

Hook lubrication

Check the oil level in reservoir 1.

Machine head lubrication

Check the oil level in reservoir 2.

Remarks

Tilt the machine head to the back.

Fill reservoir 1 through the filler opening up to the

"max"

mark

with oil.

The oil level should not drop below the

"min"

mark.

If necessary, fill oil through the drilled hole in the viewing

window up to the

"max"

mark.

Hours of

Operation