Operating instructions

1.2.2 Feed Unit
The feed unit is prepared for connection to an in-house vacuum unit. A
vacuum distributor with filter is available as optional equipment. It
allows for the attachment of up to 3 sewing units to an in-house
vacuum unit.
If no in-house vacuum unit exists the rotary blower, which is available
as optional equipment, must be ordered. The vacuum performance is
sufficient for 3 sewing units.
1.2.3 New DÜRKOPP-ADLER-Controls (DAC)
The graphical operator guidance occurs exclusively via internationally
understandable symbols.
The various symbols are combined into groups within the menu
structure of the sewing and testing programs.
The simple operation makes possible short training times.
The user has 99 freely-programmable sewing programs and four
sequences which can be called up at his disposal.
Each sequence can be combined in any desired order out of a maximum of
3 buttonhole programs. All programmed buttonholes and sequences can be
saved on a RAM memory card.
The comprehensive MULTITEST testing and error diagnostic system
is integrated in the DAC.
A microcomputer assumes the control tasks, monitors the sewing
process and shows operator errors and malfunctions in the display of
the control panel.
1.3 Optional Equipment
A flexible system of optional equipment allows the sewing unit to be
optimally and economically fitted out for each individual application.
Equipment Material number
Vacuum distributor 0841 597514
Rotary blower 3 x 380-415 V; 50 Hz 9800 810001 1
Rotary blower 3 x 220-240 V; 50 Hz 9800 810001 2
Rotary blower 3 x 220-240 V; 60 Hz 9800 810001 3
Pneumatic connections kit 0797 003031
Halogen sewing light with support 9822 510000
Retrofit kit-block cutting, max. buttonhole length 22 mm 0577 590014
for 0841 E00114 22
Retrofit kit-block cutting, max. buttonhole length 35 mm 0577 590024
for 0841 E00114 35
6