Installation and Operating Instructions

ManualsBrandsDUERR DENTAL SE ManualsElectronicsThe image plate scanner is used to read image data stored on an image plate and to transfer the data to the imaging software on a computer.

24 2160100227L02 2001V008

Assembly

Entering a ﬁxed IP address (recommended)

To reset the network settings, keep the

unit reset key pressed for 15 - 20 sec-

onds while switching on.

i Deactivate DHCP.

i Enter the IP address, subnet mask and gate-

way.

i Click on Apply.

The conﬁguration is saved.

Testing the device

You can scan in an X-ray image to check that

the unit is properly connected.

i Select the Test tab.

i Select the unit from the Registered Units list.

i Select the mode class.

i Select the mode.

i Click on Scan Image.

i Scan an image plate, see "10.3 Scanning the

image data".

EN

2160100227L29_1910V008_US-EN_nur FCC-Zulassung_V2.indd 24 14.01.2020 11:04:11