28A7250 ImagePro Projector User's Manual
1 English Table of Contents Usage Notice Precautions .......................................................................................... 2 Introduction About the Product ................................................................................. 3 Package Overview ............................................................................... 4 Installation Product Overview ................................................................................. 5 Start Your Installation ...........
2 English Usage Notice Warning- Do not look into the lens. The bright light may hurt your eyes. Warning- To reduce the risk of fire or electric shock, do not expose this product to rain or moisture. Warning- Please do not open or disassemble the product as this may cause electric shock. When changing the lamp, please allow unit to cool down and follow all changing instruction. Warning- Warning- This product will detect the life of the lamp itself.
3 English Introduction About the Product This product, designed with a high-powered metal halide lamp, is an SVGA data/ video portable projection display. The outstanding feature of it are listed as follows: q 10.34lbs (4.7 kg) lightweight compact design q 330-watt user replaceable metal-halide lamp q Single panel 6.4” TFT LCD projection system q 800 x 600 addressable pixels q Compression for 1024 x 768 XGA computer image q 16.
4 English Package Overview This projection display comes with all the items shown below. Check to make sure your unit is complete. Contact your dealer immediately if anything is missing.
5 English Installation Product Overview w Main Unit Lens Panel Control Buttons Keystone Correction Lens Latch Lamp Door Carrying Handle Elevator Foot Lamp Latch Rear Connection Ports Power Switch Power Connector Audio Outputs S-Video Connector Composite Video Connector Fuse Audio Inputs for Video Monitor Loopthrough Connector Remote Receiver Connector Computer Input Connector Audio Inputs for Computer
6 English w Remote Control Curtain Power on/Standby ON STANDBY CURTAIN FREEZE SOURCE ZOOM OUT ZOOM IN Freeze Source Selection Zoom In/Zoom Out Directional Select Keys MENU On-Screen Menus ENTER VOLUME POINTER Enter/Pointer MUTE Volume Mouse Left Button Down DRAG Left Mouse Button L R Right Mouse Button/ Backlight Function LIGHT Joystick (Mouse Cursor Function) * For more detailed information, please refer to “Function Descriptions” on page 13.
7 English Start Your Installation w Connecting the Projection Display Power Cord Monitor Cable Audio Cable VGA Signal Cable Remote Receiver Cable Audio Cable Computer Mouse Port S-Video Cable RCA Audio/ Video Cable
8 English w Remote Control Connections Follow regular setup procedures. Make sure you have a 100% compatible Microsoft Mouse and a Microsoft Mouse driver installed. Remote Receiver Cable Microsoft Mouse (Microsoft Mouse Connection) Mac or PC PS/2 Remote Adapter * Remote Receiver Cable Mac or PC PS/2 Mouse Adapter * Mac or PC PS/2 Mouse (Mac or PC PS/2 Mouse Connection) 4 Setting Up Procedure: 1. Turn off your computer. 2. Unplug the mouse from your computer.* 3.
9 English Powering On/Off the Projection Display u Powering On the Projection Display. 4 Switch on the power; then turn on the lamp by pressing “STANDBY” button. Press the “ I ” sign of the power switch to turn on the projection display. After a few seconds, press the “Power on/Standby” button to power on the projection lamp. At this time, the “Power on/Standby” indicator (the Green Light, see following figure) will be illuminated.
10 English Adjusting the Image Size q Positioning the projection display Projection Distance Image Size (diagonal) 5 ft. (1.5 m) 6.5 ft. (2 m) 9.5 ft. (3 m) 13 ft. (4 m) 20 ft. (6 m) 40" (1.01m) 60" (1.52m) 80" (2.03m) 110" (2.79m) 160" (4.06m) (min.) (max.) (projection distance and image size) q Slide the lens latch and pop up the projection lens. Switch on the power and press the “Power on/Standby” button. See “Powering On/Off the Projection Display” on page 9 for more information.
11 English User Controls User Control Overview There are two ways for you to control the functions: panel control and remote control.
12 English w OSD Menus The OSD (On-Screen Display) menus will allow you to easily adjust the display functions. Press the “MENU” button for the OSD menu options.
13 English Function Descriptions w Basic Functions: 4 Power On/Standby Press the “Power On/Standby” button to turn on the projection lamp. 4 Menu Press “Menu” button to pop up the OSD menu. 4 Reset Press “Reset” to return the display parameters of the current mode to its factory default settings. 4 Enter “Enter” is used for confirming your selection. 4 Four Directional (1) Use 5or6 button to select items. Use 3or4 to make adjustments for your selection.
14 English 4 Ceiling Projection Choose this funtion from OSD menu for a ceiling mounted projection. 4 Lamp Reset After changing a new lamp, reset the lamp life timer from OSD menus. 4 Lamp Warning Choose this function to show or hide the warning message. 4 Exit Choose “Exit” item to leave OSD menu. w Presentation Functions - computer source 4 Pointer Press the “Pointer” button to show a hand shape pointer. Use5,6,3or4button to move pointer around the projected image.
15 English 4 Tracking Choose “Tracking” item to synchronize the signal timing of the display to that of the graphic card. When you experience an unstable or flickering image, use this function to correct it. 4 Frequency “Frequency” is for changing the display data frequency to match the frequency of your computer’s graphic card. When you experience a vertical flickering bar, use this function to make an adjustment.
16 English w Presentation Functions -- video source 4 Contrast/Brightness To adjust the contrast or brightness of the image, select “Contrast/Brightness” from OSD menus. 4 Color/Tint To adjust the color or tint of the image, select “Color/ Tint” from OSD menus. 4 Freeze Press the “Freeze” button to still the screen image.
17 English Appendices Troubleshooting If you are experiencing trouble with the projection display, refer to the follows. If the problem persists, please contact your local dealer or our service center. Problem: No image appears on screen. 4 Press “Power on/Standby” button. 4 Ensure all the cables and power connections are correctly and securely connected as described in the “Installation” section. 4 Ensure the pins of connectors are not crooked or broken.
18 English 6. Under “Manufacturers”, select “Standard monitor types” 7. Verify that the resolution setting of the monitor display is less than or equal to 800x600. 4 If you are using a Notebook PC: 1. You are required to implement above steps of resolution setting of computer first. 2. Switch the Notebook PC display to the “external display only” or “CRT only” mode. 4 If you are using an Apple Macintosh or Apple PowerBook: 1.
19 English Maintenance w Changing the Lamp The projection display will detect the lamp life itself. It will show you a warning message when the lamp is used over working hours. When you see this message, change the lamp as soon as possible. Make sure the projection display has cooled for at least 30 minutes before change the lamp. Warning: Lamp compartment is hot! Allow it to cool before changing lamps! * We suggest you a Professional Engineer to change the projection lamp module.
20 English 3. Unscrew the two screws on the bottom of the lamp module. Then release the head screw of the lamp module. Bottom Screws Head Screw 4. Take out the used lamp from the usage position. Take out the head of the lamp first and then the bottom. Be careful of the hot lamp. Bottom Lamp Head Lamp 5. Replace a new lamp. Hold the new lamp by its base (we suggest you to put gloves on) and then push it firmly into the usage position.
21 English w Changing the Fuse Fuse Holder 4 Fuse Changing Procedure: 1. Switch off the power and unplug the power cord. 2. Pull out the fuse holder. 3. Remove the blown fuse and then insert a new fuse. 4. Put the fuse holder back in position.
22 English Specifications LCDPanel - active matrix TFT color LCD - 6.4” panel x 1 - tr=30ms, tf=50ms response time - 200:1 contrast ratio Lamp - 330-watt metal halide Display Resolution - 800 pixels(H) x 600 lines(V) Displayable Color - 16.7M colors Image Size - 40” to 180” diagonal Projection Distance - 5 ft. to 20 ft. / 1.
23 English Compatibility Modes Resolution H. Frequency (kHz) V. Frequency (Hz) IBM & VESA VGA 640 x 350 31.47 70.09 IBM & VESA VGA 640 x 350 37.86 85.08 IBM & VESA VGA 640 x 400 31.47 70.09 IBM & VESA VGA 640 x 400 37.86 85.08 IBM & VESA VGA 720 x 400 31.47 70.09 IBM & VESA VGA 720 x 400 37.93 85.04 IBM & VESA VGA 640 x 480 31.47 59.94 IBM & VESA VGA 640 x 480 37.86 72.81 IBM & VESA VGA 640 x 480 37.50 75.00 IBM & VESA VGA 640 x 480 43.27 85.
LEGAL INFORMATION FIVE-YEAR LIMITED WARRANTY This Dukane LCD projector is warranted to the original purchaser for a period of five (5) years from the original purchase date - in normal use and service against defects in material and workmanship. DUKANE CORPORATION EXPRESSLY DISCLAIMS ALL OTHER WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.
Audio Visual Products Dukane Corporation Audio Visual Products Division 2900 Dukane Drive St. Charles, IL 60174-3395 E-mail: avsales@dukane.
