T H E A L L N E W Education. Presentation. Inspiration. AS3 ––AirSlate3 Quick Start Guide Document:09110.10.19.
IMPORTANT Information about key downloads related to your AS3 AS3 Information Sheet Information for this product may change due to improvements. To obtain the latest manuals, literature and software please visit the Dukane web site at www. dukcorp.com/av. Choose the specific model SUPPORT or DOWNLOADS section. MAC USERS Due to frequent softare upgrades the MAC operation items are located on the Dukane web site at www.dukcorp.com/av. Go to the specific product and look at Support/Downloads.
The R&TTE Directive We, the manufacturer hereby declare that this equipment, model RCKT07 is in compliance with the essential requirements and other relevant provisions of Directive 1995/5/EC. FEDERAL COMMUNICATIONS COMMISSION INTERFERENCE STATEMENT This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
●● Reorient or relocate the receiving antenna. ●● Increase the separation between the equipment and receiver. ●● Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. ●● Consult the dealer or an experienced radio/ TV technician for help. CAUTION: Any changes or modifications not expressly approved by the grantee of this device could void the user’s authority to operate the equipment.
Congratulation on purchasing a Dukane AirSlate3 Wireless Tablet The AS3 is a wireless slate operating at 2.4 Ghz. It is easy to operate. Just install the latest drivers from the Dukane, AS3 web site at www.dukcorp.com/av. English Vista Users can operate the slate without the driver but will have only the basic mouse control and not the hot key, volume control and Macro Key functions. Fox XP or older Windows Users, the "macro Key Manager &UUSB Driver" must be installed prior to slate operation.
2.
Receiver Dongle (for the USB Port) English ▪ Binding button ▪ LED Pen How to change battery 1. 2. 3.
How to change pen tip 2. English 1. 3. LCD Window Icons Power on: Press the power button for 3 seconds, this icon will appear. Battery Indicator : There are four levels on the battery indicator. Active: Tablet is active. the pen is on or near the active surface. The table will go into power-saving mode if the pen is off for more than 3 seconds, this icon will then disappear. Connecting: After you bind the slate to the computer, the icon is visible. It means that your Tablet is connected to PC.
The interaction between the pen and the tablet: ●● Blanking: Pen is near the active area. ●● Still: Pen tip is on the active area. English Volume adjustment indicator : you can use the pen in the volume adjustment circle to adjust the computer volume. ●● Clockwise: adjusts volume louder ●● Anticlockwise: adjusts volume down Tablet number : One receiver dongle can connect to over 30 wireless tablets. The tablet connection number is indicated. 4.
English 5. Operation 1. Plug receiver dongle into your PC's USB port. 2. Press the slate power button at least 3 seconds to power on theWireless Tablet 3. Press the biding button on the back side of the tablet and biding button of the receiver dongle at the same time. 4. The LCD of Tablet will blink and the blue LED of receiver dongle will also blink. 5. Once the binding is successful, the number on the LCD will show 001 or higher (if binding more than one Wireless Tablet). 6.
6. Specifications Wireless 2.4G RF Dimension 278*282*20mm active area 7.84”*5.92” Resolution 2000lpi Report rate 120 rpst Pen pressure 1024 levels Macro key 16( top of active area) Hot key Page up / page down LCD type TN LCD LCD size 17.7*40.
