DVP507 Visual Presenter User Manual Doc 430-DVP507-00 5-20-10 [Important] Information in this Guide may change due to product improvements. To obtain the latest manuals, literature, and software please visit the Dukane web site at www.dukane.com/av and look at the specific model SUPPORT or DOWNLOADS section.
Contents Copyright Information ............................................................................................................................... 3 Chapter 1 Precautions............................................................................................................................. 4 Chapter 2 Package Content .................................................................................................................... 6 Chapter 3 Product Overview ..............................
8.12 I would like to automatically delete the captured images whenever it is turned off (Auto Erase) 26 8.13 I would like to record videos (Record) ....................................................................................... 26 8.14 I would like to switch a part of the live image (PAN) ................................................................. 27 8.15 I would like to play the slides (Slide Show) ............................................................................... 27 8.
Copyright Information Copyrights © Dukane Corp. AV Div. All rights reserved. Dukane is a trademark that is currently being registered by Dukane Corporation. Copying, reproducing or transmitting this file is not allowed if a license is not provided by Dukane Corporation unless copying this file is for the purpose of backup after purchasing this product. In order to keep improving the product, Dukane Corp. hereby reserves the right to make changes to product specifications without prior notice.
Chapter 1 Precautions Always follow these safety instructions when setting up and using the visual presenter: 1. Do not place visual presenter in tilted position. 2. Do not place the visual presenter on an unstable trolley, stand or table. 3. Do not use the visual presenter near water or source of heat. 4. Use attachments only as recommended. 5. Use the type of power source indicated on the visual presenter.
Safety Precautions Warning: To reduce the risk of fire or electric shock, do not expose this appliance to rain or moisture. This visual presenter has a 3-wire AC line Plug. This is a safety feature to ensure that the plug will fit into the power outlet. Do not try to disable this safety feature. If the visual presenter will not be used for a long period of time unplug it from the power outlet. Note RISK OF ELECTRIC SHOCK DO NOT OPEN Note: To reduce the risk of electric shock.
Chapter 2 Package Content DVP507 Guide Extender Adapter Warranty Card Remote Control C-Video Cable VGA Cable USB Cable Audio cable Power Cord Microscope Adapter Backlight (Optional) DUKANE AV DIVISION 6
Chapter 3 Product Overview 1. 2 3 3 12 10 4 5 9 11 8 7 1. 3. Lens Auxiliary floodlight and lamp arm 5. Remote control slot 7. SD card slot 9. Control Panel & Mic 11. Remote sensor 2. 4. Camera arm Backlight 6. 8. 10. 12.
Chapter 4 Installation and Connections 4.
4.2 Connecting to a Projector or Monitor VGA Cable Power Cord Projector or monitor Power Outlet 4.
4.4 Connecting to an Interactive Whiteboard (IWB) Projector USB Cable Power Cord VGA Cable USB Cable Power Outlet Computer Drivers and software can be downloaded from the Dukane website. 4.5 Connecting to a Projector, 2 PCs, and a Monitor at the Same Time VGA Cable VGA Cable VGA Cable VGA Cable Power Cord (Default) Power Outlet Computer (1) Computer (2) Projector Monitor Press [SOURCE] button to switch the image sources.
4.6 Connecting to a TV DIP Switch Extender Adapter Power Cord C-Video Cable Power Outlet NTSC: U.S.A., Taiwan, Panama, Philippines, Canada, Chile, Japan, Korea, and Mexico. PAL: Countries/regions not listed above. You must re-start for DIP switching configuration to take effective. : It doesn’t support both C-Video and VGA simultaneously. Once C-Video is on, VGA OUT is not supported. 4.
4.8 Connecting to a Computer with RS232 Extender Adapter RS232 Cable Power Cord Power Outlet Computer 4.9 Connecting to Audio Input and Output Audio Cable Power Cord Audio Cable Power Outlet Computer (1) Computer (2) Speaker : Or connect to an additional amplifier before connecting to the speaker.
4.10 Installing application software After installing the USB driver and application software, you can use the following functions: Control the DVP507. Capture and record images. Annotate the image, highlight important details and save it. Support the full screen function. : Please refer to B-Works software user manual for installation steps and software operation.
Chapter 5 Start Using : The angle range of the camera/lamp arm/lamp is limited. Do not turn it forcefully when it reaches the maximal angle. 1. Pull up the camera and the camera arm. The camera should aim at the center of the presenter. 2. Press and hold the [LAMP RELEASE] on both sides of the Visual Presenter and push the latches forward to pull up the lamp arm. 3. Turning the folded lamp arm toward the platform as in the direction of the arrow. 4. Place an object to be displayed under the camera.
Chapter 6 DIP Switch Settings : You must re-start DVP507 for DIP switching configuration to take effective. 6.1 Connecting to a projector or monitor 6.1.1 SXGA 60Hz output (default values): 6.1.2 XGA 60Hz output 6.1.3 Special mode 6.1.
6.2 Connecting to a TV 6.2.1 NTSC: America, Taiwan, Panama, Philippines, Canada, Chile, Japan, and Mexico. 6.2.2 PAL: Countries/regions not listed above. It doesn’t support C-VIDEO and VGA simultaneously. Once C-VIDEO is on, VGA output is not possible.
Chapter 7 Control Panel/Remote Control and Setting Menu 7.1 Functions of control panel and remote control : OSD ( On Screen Display) is not available in the C-Video mode. [MENU] / [ROTATE] / [PAN] / [SOURCE] / [RECORD] / [CAPTURE] / [DELETE] / [VGA] / [SLIDE SHOW] functions are not available on the monitor panel and the remote control. The following functions are listed alphabetically. Name Function Descriptions Operation Turn on and off the visual presenter.
PAN Switch a part of the live image. Remote control / Control panel RECORD Press [Record] to record images to SD card, press [Record] again to stop recording. Remote control / Control panel ROTATE Rotate the image by 0°/90°/180°/270° Remote control / Control panel SLIDE SHOW Show the photos or videos stored in the SD card (priority) or internal memory in slide mode. Remote control SOURCE Switch between different sources of signals: Remote control / Control panel 1. Live images (default). 2.
7.2 Setting Menu Press [MENU] on the remote control or control panel to enter the setting menu; The bold underlined values in the following table are the defaults. st 1 Level Major Items Function Descriptions Photo/Text Adjust the image to the optimal condition. Use the left and right arrow keys 0~Max to adjust focal length on an object. Normal/Slide/Film/ Use the left and right arrow keys Microscope to select the image mode.
Copy To SD Enter Delete All Yes/No Format Yes/No Capture Capture Time Capture Interval Setting 1. 2. 3. 1. 2. 3. 4. 5. 1. 2. 3. 4. 5. 6. Single Continuous Disable 1 hr 2 hr 4 hr 8 hr 24 hr 5 Sec 10 Sec 30 Sec 1 Min. 2 Min. 5 Min. USB Transfer 1. Camera 2. Storage device AE On/Off AWB Enter Projector Type DLP/LCD Volume 0~Max DUKANE AV DIVISION Press [ENTER] to immediately copy the data in visual presenter to the SD card.
VGA Passthrough Language Advanced Output Mode VGA IN / VGA Out 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 1. 2. 3. 4. 5. English 繁體中文 Deutsch Français Español Русский Nederlands Suomi Polski Italiano Português Svenska Česky SXGA XGA UXGA 720P 1080P Lock Down On/Off Auto Erase On/Off Preset Load Yes/No DUKANE AV DIVISION 1. Use the left and right arrow keys to select the “VGA Passthrough” to display the image. 2.
Preset Save Yes/No Factory Reset Yes/No DUKANE AV DIVISION Save the value of the current image mode. Use the left and right arrow keys to select, and then press [ENTER] to confirm. Use the left and right arrow keys to select, and then immediately press [ENTER]to activate the factory reset.
Chapter 8 Descriptions of major functions 8.1 I would like to switch image sources The default of image source is Live Image. Press [SOURCE] on the remote control or the control panel to switch settings and DVP507 will switch among the following three modes in turn: 1. Live images (default). 2. SD card (priority) or internal memory. 3. PC. 8.2 I would like to switch image sources from PC 1/PC 2 If you use the remote control or the control panel: 1. Press [VGA] to switch image sources from PC 1 or PC 2.
8.4 I would like to zoom in /out of images 1. Press [ZOOM +] on the remote control or control panel to zoom in. 2. Press [ZOOM -] on the remote control or control panel to zoom out. 8.5 I would like to use the auto focus 1. Press [AF] on the remote control. 8.6 I would like to adjust the brightness 1. Use the remote control or the control panel and press [BRT +] to increase the brightness. 2. Use the remote control or the control panel and press [BRT -] to decrease the brightness. 8.
8.9 I would like to capture images 8.9.1 Setting the quality of captured images 1. Press [MENU] on the remote control or control panel to enter the setting menu. 2. Press [] or [] to the [Storage] menu. 3. Press [] to find [Image Quality]. 4. Press [] or [] to select among [High/Medium/Low]. 5. Press [MENU] to exit. 8.9.2 Setting continuous capture 1. Press [MENU] on the remote control or control panel to enter the setting menu. 2. Press [] or [] to the [Storage] menu. 3.
8.11 I would like to delete captured images 1. Press [SOURCE] on the control panel. 2. Press [] or [] or [] or [] to select the thumbnail you want to delete. 3. Pressing [DELETE] will open a [Delete File] window. 4. Press [] or [] to select [Yes] (The default value is No). 5. Press [ENTER] to delete the selected photo. 6. Press [SOURCE] to exit. 8.12 I would like to automatically delete the captured images whenever it is turned off (Auto Erase) 1.
8.13.3. Playing image 1. Press [SOURCE] on the remote control or control panel to display thumbnails of all video recorded. 2. Press [] or [] or [] or [] to select the thumbnail you want to view. 3. Press [ENTER] for full-screen play. 4. Press [] or [] to turn to the previous/next video. 5. Press [SOURCE] to exit. Only the MOV files recorded can be played but sound output is not available from the DVP507; an additional amplifier plus speakers can be connected to the audio out port.
8.15.3 Activating/Stopping the slide show Images over 8 MB, cannot be played. While playing, the [Rotate] function can be activated to rotate the images. Remote control: 1. Press [SLIDE SHOW] to start playing. 2. Press [SLIDE SHOW] again to stop playing. Control panel 1. Press [MENU] to enter the setting menu. 2. Press [] or [] to the [Storage] menu. 3. Press [] to find [Slide Show] 4. Press [ENTER] to activate. 5. To stop playing, repeat steps 1 to 4. 8.
6. Press [ENTER] to activate the image comparison. 7. Press [] or [] to move the images (captured images only) leftward/rightward. 8. Press [MENU] to return to image thumbnails. 9. Press [SOURCE] to exit. 8.17 I would like to resume the factory default setting (Factory Reset) 1. Press [MENU] on the remote control or control panel to enter the setting menu. 2. Press [] or [] to the [Advanced] menu. 3. Press [] to the [Factory Reset]. 4. Press [] or [] to select [Yes]. 5. Press [ENTER] to activate.
8.19 I would like to set / change the password (Lock Down) 8.19.1 1. 2. 3. 4. 5. Setting the password Press [MENU] on the control panel to enter the setting menu. Press [] or [] to the [Advanced] menu. Press [] to [Lock Down]. Press [] or [] to select [On]. The screen will be displayed, as shown below: Key in Password ＊＊ 6. Key in the password Press the keys on the control panel. All keys can be used as part of the password except the [POWER] and [ENTER] keys. The maximum number of characters is 2.
5. Press [] or [] to select [On] and reactivate the password setting function. See page 21 &22 for details. 8.20 Using a SD card 8.20.1 Deactivate the card write protect function (SD Lock) If the write protect function of the SD card is activated, you will not be able to use the Capture function, although you can still read the files in it. Adjust the Lock of the SD card to deactivate the write protect function. 8.20.2 Inserting a SD card 8.20.2.
8.20.3 Ejecting a SD card Turn the power off before ejecting the SD card to avoid damaging the SD card. 8.21 I would like to adjust the volume Remote control: 1. Press [VOL+ / VOL-] to adjust the volume. Control panel: 1. Press [MENU] on the control panel to enter the setting menu. 2. Press [] or [] to the [Setting] menu. 3. Press [] to the [Volume]. 4. Press [] or [] to adjust the volume. 5. Press [MENU] to exit. 8.22 I would like to control projector Control panel: 1.
2. Click [Get Picture] will capture the photos of live images and insert the files in use shown as top right figure. 8.23.2 I would like to insert a photo in MS-Word 1. Click [Insert / Image / From Scanner or Camera] in MS-Word. 2. Select [Visual Presenter V2] and click [Custom Insert]. 3. Click [Get Picture]. It will capture the photo of live image.
8.23.3 I would like to change the setting of DVP507 then capture a photo in MS-Word 1. Click [Insert / Image / From Scanner or Camera] in MS-Word. 2. Select [Visual Presenter V2 TWAIN] and click [Custom Insert]. 3. A window showing a live image (see below) will be displayed: 4. Press [Setting] To control the DVP507 via the Camera Settings interface. The operating procedure is the same with the remote control and control panel of the DVP507. Refer to pgs 17 and 18.
5. Press [Capture] to capture images in MS-Word. 6. Press [Cancel] to exit. 8.23.4 I would like to set the DVP507 as a webcam for Skype The DVP507 can be used as a webcam for teleconferencing software such as Skype and MSN. The following instructions use Skype as an example: 1. Open Skype and enter [Tools] > [Options]. 2. Select [Video Settings] > [webcam] > [Visual Presenter V2] and check Start my video automatically when I am in a call, as shown below. 3. Start calling your contact.
8.23.5 I would like to set the DVP507 as a PC Camera 1. Press [MENU] on the control panel to enter the setting menu. 2. Press [] or [] to the [Setting] menu. 3. Press [] to find [USB Transfer]. 4. Press [] or [] to select [Camera]. 5. A window will be displayed, showing the [Visual Presenter V2], as shown below. 6. Click the [Visual Presenter V2]. 8.23.6 I would like to set the DVP507 as a Removable Disc 1. Press [MENU] on the control panel to enter the setting menu. 2.
Doing this will disable the [Capture] function. Suggest you return it to [Camera] mode after using this function. Please follow the steps below. 1. Press [MENU] on the control panel to enter the setting menu. 2. Press [] or [] to the [Setting] menu. 3. Press [] to find [USB Transfer]. 4. Press [] or [] to select [Camera]. 5. Press [MENU] to exit. 8.23.
Chapter 9 Connecting to Microscope 1 Mount the microscope adaptor onto the microscope. Please choose an appropriate microscope adapter. Microscope adapter accessories are applicable to eyepieces of Ø28mm, Ø31mm, Ø33mm, and Ø34mm. 2 The lens of DVP507 connects with the microscope adaptor. If the eyepiece is Ø33mm or Ø34mm, only one Dukane microscope adapter is needed. If the eyepiece is Ø28mm or Ø31mm, you need two microscope adapters. (1. The Dukane microscope adapter. 2.
5.2. 5.3. 5.4. 5.5. Press [] or [] to the [Display]. Press [] to select [Digital Zoom]. Press [] or [] to select [On]. Press [Zoom +] / [Zoom - ] Please reset to normal mode after using the microscope, otherwise, you are unable to use the zoom in/out function. 1. Press [MENU] on the remote control or control panel to enter the setting menu. 2. Press [] or [] to the [Display]. 3. Press [] to select [Mode]. 4. Press [] or [] to the [Normal].
Chapter 10 Packing the Machine 1. Insert the remote control into the left slot of the machine. 2. Rotate and position the lamp arms on both sides. 3. Pull down the lamp arm back to the latches. 4. Bend the lamp arm inwards and adjust the lens to be parallel to the platform 5. Finally, fold the machine as in the following figure.
Chapter 11 Troubleshooting This chapter describes problems you may encounter while using DVP507. If you have questions, please refer to related chapters and follow all the suggested solutions. If the problem still occurred, please contact our distributors or service center. No.
DUKANE CORP AV SERVICE DEPT 2900 Dukane Drive, 800-676-2487 / St Charles, IL 60174 630-762-4032 DUKANE AV DIVISION www.dukane.
DUKANE AV DIVISION 43
