Camera 220C Document Camera User’s Guide #401-220C-00
Table of Contents TABLE OF CONTENTS ......................................................................................... 0 TABLE OF CONTENTS ......................................................................................... 1 COPYRIGHT INFORMATION ................................................................................ 2 CHAPTER 1 PRECAUTIONS ................................................................................ 3 CHAPTER 2 PACKAGE CONTENT ......................................
2
Chapter 1 Precautions Always follow these safety instructions when setting up and using the Digital Presenter: 1. Do not place the Digital Presenter on an unstable trolley, stand or table. 2. Do not use the Digital Presenter near water or source of heat. 3. Use attachments only as recommended. 4. Use the type of power source indicated on the Digital Presenter. If you are not sure of the type of power available, consult your dealer or local electricity company for advice. 5.
Safety Precautions Warning: To reduce the risk of fire or electric shock, do not expose this appliance to rain or moisture. This Digital Presenter has a 2 wires AC line Plug. This is a safety feature to ensure that the plug will fit into the power outlet. Do not try to defeat this safety feature. If the Digital Presenter will not be used for an extended time, unplug it from the power outlet. CAUTION RISK OF ELECTRIC SHOCK Caution: To reduce the risk of electric shock. Do not remove cover (or back).
This is a Class A product. In a domestic environment it may cause radio interference, in which case the user may be required to take adequate measures. The typical use is in a conference room, meeting room or auditorium.
Chapter 2 Package Content Please make sure the package comes with the following items when you unpack: Camera 220C User’s Manual CD Power Cable USB Cable C-Video Cable VGA Cable DVI Adapter Remote Controller 6
Chapter 3 Product Overview 3.
3.2 I/O Connection 3.
3.4 Infrared Remote Control 3 2 1 12 4 5 11 6 10 7 8 9 1. Power: Turn on/ off. 2. Capture: Capture the image. 3. Freeze: Freeze the image. 4. Arrows: You may press the 4 hot keys of Up/Down/Right/Left to go to the desired function item then press the Enter key to take effect. Different color contrast modes. 8. Lamp: Turn on/ off Lamp. 9. Play & Del: Play press, you can recall the saved images in the flash memory of your Digital Presenter. Press Del if you would like to discard the saved image.
Chapter 4 How to use it This chapter describes the basic and advanced functions of the Digital Presenter, how to use the OSD (On Screen Display) menu. 4.1 Getting Started 4.1.1 Turn on the Digital Presenter. ¾ Option 1: Press button. ¾ Option 2: Press button of remote controller. 4.1.2 Lens focus ¾ Turn the lens to optimize the focus 4.1.3 Zoom in / Out ¾ Press the control button 4.1.4 Switch source ¾ Press to Choose signal source between Camera 220C or PC. That signal is sent to the projector.
4.1.5 Photo/Text: ¾ Press to Select the text or photo mode. 4.1.6 Enter AWB (Auto White Balance) ¾ press to make the auto white balance. 4.1.7 Capture Image & Review capture image ¾ How to capture an image Method 1：Press on the remote to capture image that you would like to save. Method 2：Follow the steps using the pad buttons on the Camera. 2.1 First, press to go to the OSD interface. 2.
1.1 First, press button to go to OSD interface. 1.2 Second, press ^ v to survey icon, and press Then select “Playback”, and press , so you can see all captured thumbnail images on the screen. 1.3 You can press button to select the images which you want to magnify. (Enlarge to full screen) Then press , the image will appear as full screen. Method 2: Using the Remote Control: 2.1 First please press the button to see all thumbnail images that you had captured.
3.2 Press ^ v select press icon and . Then select “Playback”, and press , so you can see all captured thumbnail images on the screen. 3.3 Then, press button to select the thumbnail image which you want to magnify and press , the image will show on full screen. 4.2 Showing the OSD (On Screen Display) Menu ¾ Option 1: Press button to show the OSD Menu ¾ Option 2: Press button of remote control. 4.
4.4 OSD Menu Introduction The Main Menu containing five icons and detail functions will be explained in next page. Setting Display Source Storage Exit ¾ VGA Mode (Computer Image) Layer 1 Setting Layer 2 Layer 3 Function Lamp On / Off / Exit Select Lamp On or Off. Night view On/Off Select Night view function On or Off. Language English, Deutsch, Francais, Italiano, Espanol, Русский, Select a preferred language on the Output Format Factory menu.
Brightness 0-46 (for PAL) Brightness adjustment 0-40 ( for NTSC) Display Zoom Digital Zoom Adjust Zoom 100% ~ 1600%. (100% to 1600%) Gamma Photo / Text Select Photo/Text Mode. Image Normal / Gray / Film Select Normal/Gray/Film Mode. Flip On/Off Adjust the image up and down by 180°. Freeze On/Off Use Freeze to retain the image on the screen. Exit Exit this menu. Presenter Select images of Presenter or VGA In. VGA In Source Storage Capture Capture the image of Presenter.
VIDEO Mode (For NTSC, lower resolution) Layer 1 Layer 2 Layer 3 Function Brightness 0-46 (for PAL) Brightness adjustment 0-40 ( for NTSC) Display Gamma Photo/Text Image Normal/Gray Freeze On/Off Exit Lamp On/Off Night view On /off Exit Setting Language Factory Reset Exit Select Normal/Gray Mode. Use Freeze to retain the image on the screen. Exit this menu. Full Range On/off Advance Select Photo/Text Mode.
Using the USB Line to a Computer 1. Insert the CD into the computer. 2. Connect the Digital Presenter and PC with USB Cable. Follow instructions for driver download. 3. Launch the VIEWII application. 3. Control Functions: 3.1. Brightness: Brightness Adjustment 3.2. Focus: Focus Adjustment. ( only for Digital Presenter series) Zoom: Zoom in/out Adjustment 3.3.
3.4. Flip: Flip the Image of Digital Presenter. (Only flips the output image to the projector. Will not flip image on PC monitor.) 3.5. Freeze: Freeze the image of Digital Presenter. 3.6. Photo: Adjust the gamma. (The Photo and Text functions are not available on the computer monitor) 3.7. Lamp on: Turn on the lamp Lamp off: Turn off the lamp 3.8. AF: Focus automatically. ( only for Digital Presenter series) 3.9. Source: Switch the Signal Source output (VGA or Presenter). 3.10.
4. Real time display Mode: Real Time display of the object. 5. Device Control Mode: The last image of the object will be frozen in the window and the “file browse window” will be shown on the left side of window.
5.1. 5.2. File: Browse the Image files in the internal folder of Digital Presenter. Internal: These images were captured by Digital Presenter, and are located in the internal memory of Digital Presenter. They can be transfered to a PC. 5.2.1. Upload / Download: 5.2.2. Right Click on the “Internal” Folder, then the following menu will appear on the screen.
5.3. Notice: If the uploaded images are not 1024*768 resolution, the following message window will appear on the screen, you can thn select a scale: 5.3.1. Un-Scaling. 5.3.2. Full Scaling To 1024*768. 5.3.3. Smart Scaling (Proportional Scaling Close to 1024*768). 5.4. Remote Control: 5.4.1. Right Click on "Internal" then click the “Remote Control”, the control panel will be shown.
Chapter 5 Troubleshooting If none of the suggested solutions solves the problem, call your dealer or your service center. Problem 1: No picture from the Digital Presenter. Solution 1: Wait a few seconds, press desired source selector again. 2: Press a different source, then press-desired source again. 3: Check if the power is turned on. (Pilot Light On?) 4: Make sure the document or object is positioned under the camera. Problem 2: Cannot Focus, camera will not focus properly.
Audio Visual Products 2900 Dukane Drive St. Charles, Illinois 60174 www.dukcorp.com/av Toll-free: 800-676-2487 Fax: 630-584-5156 e-mail: avsales@dukcorp.
