DUKANE AV USER GUIDE MODEL LB77HA INTERACTIVE WHITE BOARD Information in this Guide may change due to product improvements. To obtain the latest manuals, literature, and software please visit the Dukane web site at; www.dukcorp.com/av and look at the specific model SUPPORT or DOWNLOADS section. DUKANE CORP AV SERVICE DEPT 2900 Dukane Drive St Charles, IL 60174 800-676-2487 / 630-762-4032 Fax 630-584-5156 avservice@dukcorp.com www.dukcorp.
Legends Instruction: additional information about the software Note: the issues which may occur during your using the board and how to resolve or avoid them. Warning: Harm may occur in the course of using, or damage to the product may occur due to the improper use of the product.
Contents DUKANE AV ........................................................................................................................................1 St Charles, IL 60174 ..............................................................................................................................1 Legends ..................................................................................................................................................2 Contents.........................................
Introduction Brief Introduction Thank you for purchasing the Dukane interactive whiteboard. Please think of the board as a wall sized mouse pad with special software. As part of a new generation of digital educational devices, the interactive whiteboard is a combination of electronic and software technology.
System Requirements Hardware Configuration Software configuration Minimal configuration CPU: 1GHz RAM: 256 MB Windows2000, XP、Vista Suggested Configuration CPU:1.7 GHz or more RAM :512 MB or more Windows2000, XP、Vista Microsoft Internet Explorer 6.0.0 Microsoft Internet Explorer 6.0.
Standard Accessories include: Description Quantity electronic whiteboard pen 2 Purpose The pen specially designed for interactive whiteboard, with 1.5 V batteries.
Board description Whiteboard items: (Color of the product will vary with model) Ⅰ:Writing Area Ⅱ:Function keys Ⅲ:Interface Board Ⅳ:Pen Container 1. Power Socket 2.
Installation 1、 、Install Interactive whiteboard Wall Hanging mount 1) Select the desired wall surface and attach the hangers on the wall surface at the proper locations for the interactive whiteboard. Note that the following patterns are in mm (1 inch = 25.4 mm).
Note: Stick gasket material to the back of the interactive whiteboard, see the figure below. 3) Attach the interactive whiteboard to the fixed wall hangers. 2、 、Connect Interactive whiteboard CABLE Connect the cable to the board and run the cable to the PC. Do not connect to the PC till the software is installed. The USB cable will supply the DC Power for the board.
1) 2) Connect cable to the interactive whiteboard. Install cable run. Do not connect interactive whiteboard cable to the PC yet. The Interactive whiteboard and PC should have their power off when making all connections!!! Except the USB connection after the drivers and software has been installed. 3、 、Install Battery of Electronic Pen Turn the rear cap of the electronic pen counter-clockwise to open it, load one 1.5V battery according to the following figure, then tighten the rear cap clockwise.
4.4) Click to install IPBOARD DualPen Driver and IPBOARD DualPen Software for Interactive whiteboard; 4.5) Choose the language for the installation. 4.6) Select the path for installation.
4.7) After the software installation is completed the system will install the USB driver. 4.8) If the USB cable provided with the interactive whiteboard is white, click “Yes” to complete the installation of the USB driver. If the USB cable is black, click “No” and proceed to > -> to install the driver. - 4.8) After the driver installation is completed connect the USB cable to the PC to complete the hookup. 4.9) Complete installation.
5、 、Step-by-step Installation of IPBOARD DualPen Software This installation option is recommended when upgrading IPBOARD DualPen software or replacing the USB cable. 5.1) Follow 4.1) - 4.3) to enter installation guide window. 5.2) Click to install IPBOARD DualPen Driver, IPBOARD DualPen software and USB cable by following the step-by-step guide.
5.3) Install IPBOARD DualPen Driver to install driver for Interactive Whiteboard; 5.3.1) Click 5.3.2) Choose the language . 5.3.3) Select the path for installation.
5.3.4) Click NEXT and follow process to complete the installation. 5.4) Install IPBOARD DualPen Software, Click the installation. and follow 4.5) - 4.8) to complete 6、 、Install USB- -RS232 connection cable Driver There is no need to repeat this step when using Express Installation. This step is only required when using Step-by-step Installation. If USB-RS232 connection cable is used, the corresponding driver must be installed. Click to install the driver for USB-RS232 cable. 6.
After installing correctly “My Computer” ->“Properties” -> “Hardware” -> “Device Manager” -> “Port” are shown as the device “USB Serial Port” After installation of USB-RS232 cable is completed, plug-in the USB cable, and to check the COM number of the USB Serial Port in “My Computer” >“Properties” -> “Hardware” -> “Device Manager” -> “Port” and to make sure that the COM number is less then 10 and the baud rate is 19200. 6.
Running the software 1、 、Startup of interactive whiteboard driver Click"Start"->"All programs"->" >" ->" "- ", and start IPBOARD DualPen Driver. It will show a tray icon of communication module , in the status bar if the lower-right corner of the desktop. If it shows "Communication with board failed", please make sure that the connecting cable and Interactive whiteboard is correctly connected and the driver for the USB cable has been correctly installed.
Please select "Re-orientation" for the first time installation of the interactive IPBOARD DualPen Driver, or if the position of projector and interactive whiteboard has changed. You can obtain a fast orientation by selecting "Previous re-orientation record", if there are no hardware changes since last time. When there is no need for accurate orientation, you can select "default orientation".
Ensure the connection between interactive whiteboard and PC is good and driver of interactive whiteboard is running before starting up application software. If not, the application program will not startup normally. 4、 、Create an individual account and password 1) Click "Start" ->"All Programs" ->" "->" " "-> " and will pop-up the following window: Key-in the administrator account to operate the software. Default administrator account is: Administrator, ,Password: julong.
5) The new user will be displayed in the window after the process is completed: N ew user 5、 、Dual Pens Function Setup Click "Options” , and the page below appears. Start the dual pen function.
Function Keys Function keys Definition Control Mode Window Mode Annotation Mode Orientation Orientation Orientation Orientation Control Mode No Effect Switch mode Annotation Mode Switch to annotation mode Switch to annotation mode No Effect Window Mode No Effect Head Page Head Page Create a blank page Create a blank page Create page Page Up No Effect Page Up Page Up Page Down No Effect Page Down Page Down Normal Pen Switch to annotation mode and use Normal Pen Normal Pen No
Trouble Shooting 1. If startup shows “Failed to verify the whiteboard, the program can't run further!” please check whether there is a good connection between whiteboard and PC.”” Please check if using the special-purpose cable of whiteboard, and if there is a good connection for cable. When connection is made through the USB2.0 to RS232C cable, check whether it is correctly connected with special-purpose adapter. Check whether the whiteboard has power.
3) 9. Have at least 800 lumens of light output. How to operate when the serial ports are occupied. Both table top and notebook PCs allow the addition of a new serial port. There are 2 options; Install a serial port card on the PC (note: generally, PCMCIA serial port card for a notebook PC) Using "USB2.0 to RS232C+ special designed cable ” to connect whiteboard and the PC. 10. Can 25-pin serial port replace 9-pin serial port? Yes, but only if you have installed an adapter for 25 to 9 pins on the PC.
Performance index Hardware Platform PC, notebook PC Operation System Windows 2000/XP/Vista Transmission RS-232C/USB / Wireless Module Interface Resolution 8192×8192 Data-signaling rate 19200Baud Rate Operating Principle Wireless electromagnetic induction Operate Mode Control Mode/ Window Mode / Annotation Mode./Full-screen USB Power Supply Mode DC 5V 100mA Or Powered by external 5V adapter Service life of battery Service life varies for different battery types.